Results 1 to 10 of 29
Like Tree9Likes

Thread: ATG feedback question

Hybrid View

  1. #1
    Senior Member kwlfca's Avatar
    Join Date
    Mar 2013
    Location
    Niagara Region, Ontario, Canada
    Posts
    1,106
    Thanked: 96

    Default

    +1 on the above advice. If it's haphazard then that usually means you just have to dial in your technique. Prep and good lather is key, especially on the second or third pass that the ATG usually happens on...unless you're like me and a down stroke on the left side of your neck is actually against the grain (a mix of ATG, WTG and XTG actually )...then it's on the first pass

  2. #2
    Senior Member Fort's Avatar
    Join Date
    Sep 2013
    Location
    Perkasie Pennsylvania
    Posts
    121
    Thanked: 5

    Default

    Ok thanks for the feedback so far.

    I shaved tonight and really kept the blade flat with the spin near touching and during those ATG strokes it managed nicely. I also really focused on the side burns since its one area that is easy to get right and they are BSS. So with this I think its not the razor and more my technique.

    My under chin area or upper neck area is tricky, and the ATG stroke would need to go from my earlobe and down to just below my Adam's apple. I struggle trying to figure which hand to use on which side of my face. All of my WTG strokes are so simple.

    I need to watch more videos for more varieties of how others tackle these areas. I need to get more shaves under my belt plain and simple.

    I now have two razors. One is a Ralf Aust that I re-honed myself ( I dropped it) and the other is a razor I just received today, in fact, and it's the one I shaved with. This razor was purchased from Maxi here on the forums which he shave tested before it was sent. I had the same issue as with my Ralf Aust in my trouble areas so I'm hypothesizing that my Razors are shaving well.
    Birnando and kwlfca like this.
    "The blade must always be respected"

  3. #3
    Senior Member kwlfca's Avatar
    Join Date
    Mar 2013
    Location
    Niagara Region, Ontario, Canada
    Posts
    1,106
    Thanked: 96

    Default

    Quote Originally Posted by Fort View Post
    Ok thanks for the feedback so far.

    I shaved tonight and really kept the blade flat with the spin near touching and during those ATG strokes it managed nicely. I also really focused on the side burns since its one area that is easy to get right and they are BSS. So with this I think its not the razor and more my technique.

    My under chin area or upper neck area is tricky, and the ATG stroke would need to go from my earlobe and down to just below my Adam's apple. I struggle trying to figure which hand to use on which side of my face. All of my WTG strokes are so simple.

    I need to watch more videos for more varieties of how others tackle these areas. I need to get more shaves under my belt plain and simple.

    I now have two razors. One is a Ralf Aust that I re-honed myself ( I dropped it) and the other is a razor I just received today, in fact, and it's the one I shaved with. This razor was purchased from Maxi here on the forums which he shave tested before it was sent. I had the same issue as with my Ralf Aust in my trouble areas so I'm hypothesizing that my Razors are shaving well.
    It's easy to get BBS on your face...neck and chin are a different story!
    What helped me map out my neck grain was getting a DE.
    You'll figure out what works for you.

    I use the opposite hand for ATG...right hand for left side etc.
    As long as it's comfortable for you and you don't limit yourself to one hand, you'll get it.

  4. #4
    Senior Member Fort's Avatar
    Join Date
    Sep 2013
    Location
    Perkasie Pennsylvania
    Posts
    121
    Thanked: 5

    Default

    Kwlfca I was just thinking about the DE too. I have 3 DE's: Gillete Flare tip, Gillette slim adjustable, and a Muhle R89. I took how they could help for granted because I only do 2 passes and touch up with them 1 WTG, 1 ATG and then a few target spots and I call it a day.

    Now I know my grain and how to hit with the DE but I cannot get the straight to take the same path. So I need to put the work in and figure it out.

    Oh and the opposite hand with ATG as compared to WTG is a something I'll try. I go with that technique and see how things feel while noting where i think a change would be better.
    Last edited by Fort; 10-01-2013 at 03:57 AM.
    "The blade must always be respected"

  5. #5
    Plausibly implausible carlmaloschneider's Avatar
    Join Date
    May 2011
    Location
    Mount Torrens, South Australia
    Posts
    5,979
    Thanked: 485

    Default

    Quote Originally Posted by Fort View Post
    Kwlfca I was just thinking about the DE too. I have 3 DE's: Gillete Flare tip, Gillette slim adjustable, and a Muhle R89. I took how they could help for granted because I only do 2 passes and touch up with them 1 WTG, 1 ATG and then a few target spots and I call it a day.

    Now I know my grain and how to hit with the DE but I cannot get the straight to take the same path. So I need to put the work in and figure it out.

    Oh and the opposite hand with ATG as compared to WTG is a something I'll try. I go with that technique and see how things feel while noting where i think a change would be better.
    A DE is much more maneuverable (I find) than a straight. I find using a smaller straight does help, esp on the neck. There are some areas on my neck where the hair grows sideways, so getting 100% ATG on those spots is still almost impossible for me.

    I used to have a Schulze Wiener Schaber (pictured below with my W&B for size comparison) and that was a very maneuverable razor.

    Name:  Weiner Schaber. Wade and Butcher Comparison01.jpg
Views: 117
Size:  26.3 KB

    PS, I don't want to be an 'enabler' but Revisor still have the Wiener Schaber razors for 68 Euros...

    http://www.revisor-solingen.de/html/..._woche_13.html
    Last edited by carlmaloschneider; 10-01-2013 at 06:49 AM.
    kwlfca likes this.
    Stranger, if you passing meet me and desire to speak to me, why should you not speak to me? And why should I not speak to you?
    Walt Whitman

  6. #6
    Senior Member kwlfca's Avatar
    Join Date
    Mar 2013
    Location
    Niagara Region, Ontario, Canada
    Posts
    1,106
    Thanked: 96

    Default

    I literally just bought a razor from revisor!
    But yes it is much harder to get across the grain on the neck...can't exactly do an ear to ear pass with a straight!

  7. #7
    Plausibly implausible carlmaloschneider's Avatar
    Join Date
    May 2011
    Location
    Mount Torrens, South Australia
    Posts
    5,979
    Thanked: 485

    Default

    Quote Originally Posted by kwlfca View Post
    I literally just bought a razor from revisor!
    But yes it is much harder to get across the grain on the neck...can't exactly do an ear to ear pass with a straight!
    Well, buy another! You need a mixture, of course...
    Stranger, if you passing meet me and desire to speak to me, why should you not speak to me? And why should I not speak to you?
    Walt Whitman

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •