Results 1 to 10 of 12
-
06-25-2015, 05:41 PM #1
- Join Date
- May 2015
- Location
- Traverse City, Michigan
- Posts
- 141
Thanked: 5Did I start my venture into straight shaving the wrong way?
Hi all,
I just recently got into trying out straight shaving. I probably have about 5-7 shaves (partial shaves) with them. I currently have four razors so my question is:
Should I have just gotten one razor and used it til I got it down like they say you should with DE shaving?
If I should use only one, then out of the four I have, a Torrey, Red Imp 132, Gold Dollar stainless (model 800?) and a Duble Duck 9/16's, which one should I just use solely til I get my technique down?
Thx. in advance for any comments and help!
-
06-25-2015, 06:09 PM #2
Personally I think either approach could work, but since each razor is a little different, it probably makes sense to pick your favourite and really get to know how to use it. Which one you choose is entirely up to you although I'd probably not choose the Gold Dollar since they *can* have issues with steel quality and grind. Could be fine, but the odds of having a potential dud are higher with it than the other three.
The most important thing of course when it comes to the razor is that it is shave-ready (i.e. honed by someone who specializes in razor honing). So if you do choose one to focus on learning with and find it beginning to tug or become uncomfortable to use, then grab another while you're getting the first one honed up. In other words if you choose to focus on one, don't be dogmatic about it if the razor is telling you that it needs a touch-up.
EDIT: forgot to say that regarding your original question, there are few "wrong" ways to get into straight razor shaving, just a load of different ways. Finding what works for you is part of the fun IMHO.Last edited by Cangooner; 06-25-2015 at 06:12 PM.
It was in original condition, faded red, well-worn, but nice.
This was and still is my favorite combination; beautiful, original, and worn.
-Neil Young
-
06-25-2015, 06:47 PM #3
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,432
Thanked: 4826I think that sums it up from my perspective too.
It's not what you know, it's who you take fishing!
-
06-25-2015, 09:31 PM #4
I certainly would not start with a Gold Dollar
One tired old Marine- semper fi, god bless all vets
-
06-25-2015, 09:46 PM #5
- Join Date
- May 2015
- Location
- Traverse City, Michigan
- Posts
- 141
Thanked: 5Thx. guys!
I forgot to mention that they all were suppose to be "shave ready" but I just sent the Red Imp out to get rehoned as it just didnt feel right but it could have been me and not the razor but the others didnt feel like that one does. It seems to tug alot but like I said, might or more than likely was me!
-
06-25-2015, 10:10 PM #6
I would probably "retire" the Gold Dollar and use one of the others that you are most comfortable with. Each razor or grind, like each face, can require a different angle or technique. Because of that, I'd probably use the one i was most comfortable with until I was getting consistently good shaves.
Just call me Harold
---------------------------
A bad day at the beach is better than a good day at work!
-
06-25-2015, 10:32 PM #7
For just out of the gate and finding 3 nice vintage razors and only 1 'questionable' one is very good. Many times, it's just the questionable razor that is found to start learning this age old art.
I concur with the consensus that finding a 'favorite' and sticking with it would be best. However I see no mention of whether or not those razors are Shave Ready. It has been brought up that they should be honed by someone who knows what they are doing.
The difference between a truly shave ready razor and one that's 'marginal' is the difference between Black and White.
When I started I had my deceased uncles 9/16 round point Genco Grant and it would shave. But not well, so I sent it off to be honed and By God! There was a Huge Difference!
After I finally learned the angles, 'lack' of pressure etc it just got better and better!
I waited well over a year before I decided to start honing my own razors. As a former Meat Cutter I 'knew' that it wouldn't be any problem. Guess What? Problem!!!! Honing a razor and sharpening a knife is Totally Different! Just Like Day and Night!
Thanks to a certain Pro Honer, his videos and personal help, I now get very nice edges and thus Very Nice Shaves!
Enjoy the Ride. It's a Long Strange Trip! But it's Well Worth the Journey!Our house is as Neil left it- an Aladdin’s cave of 'stuff'.
Kim X
-
06-25-2015, 10:38 PM #8
The only other advice I would give is that spikes can be troublesome unless you keep an eye on them. Yours look to be muted but I would read up on how to mute them and then make a decision.
A good lather is half the shave.
William Hone
-
06-26-2015, 03:41 AM #9
I personally would start with the Torrey. The Duck and the red Imp are fine razors, but from the pictures the Torrey has a somewhat rounded tip. The spike on the Imp is just begging to slice a new shaver! (And experienced shavers not paying attention
I have no personal experience with them, but have heard iffy things about the gold dollars.
From personal experience- I did better using one razor for a while until I got used to the whole wet shaving thing, then I started to rotate and experiment with new blades.
Have fun!!
-
06-26-2015, 04:03 AM #10
The torrey is closest to standard razor 5/8 full hollow, although yours has fairly stiff grind. The imp is definitely wedge ground and the duck is a bit narrow (it looks like it were honed too much down from its original 5/8 size). I wouldn't have picked a duck in that condition, there are so many of them that there is no reason not to wait for one that's not been abused.
The red imp should be closest to how it was made to shave, but you are saying it needs honing, so it's out at least for now.
The Gold Dollars I've tried have sucked compared to any razor of the brands you have, but if you like how it shaves you can go for it.