Results 1 to 10 of 21
Like Tree37Likes

Thread: Random thoughts after a year of straight razor shaving

Hybrid View

  1. #1
    EV2
    EV2 is offline
    Junior Member EV2's Avatar
    Join Date
    Nov 2014
    Location
    Melbourne, VIC, Australia
    Posts
    28
    Thanked: 8

    Default

    I only wipe it on paper and/or cloth towel. I used to rinse it under running water then dry it off, but found that once in a while despite my best efforts a stray droplet would still get on the blade anyway and leave a mark, so I stopped doing it.

    BTW, one more observation I should have made earlier: SRP is by far the most gentlemanly forum I've ever encountered on the web.
    Last edited by EV2; 09-28-2015 at 06:22 AM.

  2. #2
    Silky Smooth
    Join Date
    Sep 2008
    Location
    Southern California
    Posts
    802
    Thanked: 154

    Default

    Thanks, EV2. I was being a bit thick-headed. Your explanation of wiping the blade makes sense. And evidently works quite well.

    As you undoubtedly know, spots on the blade like that are often caused by water getting in between the scales. I give them a glance after wiping off the blade and, finding any evidence of water run a folded over tissue between them to remove it.

    I used to be pretty much a "duck" when it came to getting water all over things. What I do now to rinse the blade so that no soap residue that can also cause tarnish or rust remains on the blade is to open the razor so that the blade and scales are lined up,. I then pinch the tang between thumb and forefinger, wrapping the scales in the palm of my hand, and move the toe blade in a straight line into a stream of water running from the faucet, stopping at the point where the water splash against the blade is just reaching the heel. I then rotate the razor about the axis of the straightened blade and scales by rotating my wrist, thereby rinsing all parts of the blade only, my fingers and palm protecting the rest of the razor. I remove the razor from the water stream by moving my hand straight back, keeping it away from the faucet and side of the sink, afterward drying the blade by - you probably guessed - wiping it on a towel with a stropping motion. This whole process may sound complicated, but it takes perhaps five seconds from start to finish. I rinse the blade during the shave the same way. I have never dinged the blade on a sink in the nine years that I have been using an open razor for shaving.

    Good on you for using a "proper" razor for an entire year. Here's hoping you enjoy shaving with an open razor for many more years!

    Jeff
    Last edited by JeffR; 09-28-2015 at 01:03 PM. Reason: Corrections to narrative tense.
    de gustibus non est disputandum



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •