Results 1 to 10 of 24
Thread: razor cleaning ?
-
05-23-2016, 07:25 AM #1
- Join Date
- May 2016
- Posts
- 38
Thanked: 3razor cleaning ?
New user .. so please excuse my naive questions ! But must you clean a razor especially the blade with some form of liquid soap after every shave. And does it need to be oiled after every shave. Or just dried and stored away. I ask this because just drying doesn't seem to get rid of the shaving foam gunk for me. There still seems to be a light coat of it hanging around the blades even after a wash and drying on dry towel or blotting out moisture with some TP.
I am pretty nervous when I am soaping around the edges of the blade every time after a shave. Seems like a dangerous activity is making itself too frequent, since I want to store it away clean, am I putting myself in needless danger or cleaning once a week etc will do ?
-
05-23-2016, 07:37 AM #2
Unfortunately, cleaning the blade can cause you some chills, but must be done, and soon you will be used to do it without ringing a nerve. You can, after a shave, strop the blade lightly, a few times, on a moist sponge, but then you need to dry it with a piece of toilet paper or tissue. After that, do not forget to strop the razor 5-10 times on the leather just to assure your edge is completely dry. You'll be used to.
-
05-23-2016, 08:00 AM #3
- Join Date
- May 2016
- Posts
- 38
Thanked: 3this is what I was afraid of. lol.
-
05-23-2016, 10:40 AM #4
I rinse my blade off after use purely with water, dry on a towel and then strop between 20 - 30 times.
Tony
-
05-23-2016, 11:31 AM #5
- Join Date
- Aug 2009
- Location
- Des Moines
- Posts
- 8,664
- Blog Entries
- 1
Thanked: 2591I too rinse and wipe in a towel, very easy and not at all risky to do.
Stefan
-
05-23-2016, 11:32 AM #6
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,308
Thanked: 3228I do as the previous posters do but also leave my razor open to air dry before closing and putting it away. Also you can dry between the scales too with toilet paper to make sure there is no water hiding there.
You mention "shaving foam gunk" not rinsing off with water. Do you use shaving foam from a can or do you use a brush and soap to lather with? If you use a brush and soap to make lather with, it should easily rinse off the blade under running water with no residue left on the blade prior to drying the blade.
BobLife is a terminal illness in the end
-
05-23-2016, 11:44 AM #7
- Join Date
- May 2016
- Posts
- 38
Thanked: 3I use gillette shaving cream and gillette synthetic brush. It's nothing top of the line, but this works. I see a small film of shaving cream still on the blade even after washing it under tap and thus apply some liquid soap to clean the blade, I do it as matter of habit now. but I am afraid that someday I will cut a finger because I may be too tired to be as careful everytime. I also use a bath oil to oil the blade after shaving it, it seems to keep the shine on the blade. I don't know what kind of bath oil it is, it is a generic one bought a long while back from pharma plus.
Since I am still in starting stage, I am babying my razors a lot more. I don't know if I will be able to sustain this for ever. There is one particular razor which had the most elusive edge and I learnt sharpening on that one and thus after I managed to get a mirror polish edge, I tended to baby it a bit. What I was thinking is, can it do with a little less care as I do now.
-
05-23-2016, 12:05 PM #8
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,308
Thanked: 3228It could be that your lather is a bit on the dry/pasty side and that can cause it to not cleanly rinse off under running water.
You really can't be too fussy about properly drying a razor lade off. It is amazing how quickly you can get rust on a blade under the right conditions.
BobLife is a terminal illness in the end
-
05-23-2016, 12:55 PM #9
Soap is not needed. Just a rinse is fine. The shave lather should mostly come off when rinsing. Like others said, dry it on a towel. I let mine air dry while I clean up then strop it a little, a few to 10 strokes just to get residual water of the cutting edge. If water got in the scales or near the pivot pin the use a qtip to dry too. Dryness is paramount.
-
05-23-2016, 01:25 PM #10
These guys have given some great advice, BUT !!!!!!!! If you live in America Dairy Queen napkins are great for this purpose. They will take off soap scum, hair, blood, and rust I think. They will not remove ketchup or chili from your face or hand this will cause the 4"x something size napkin to disintegrate instantly. If you ask for extra napkins the girls that work there will pile them into the bag for you. As soon as I finish shaving I wipe the blade with one of these napkins. Then rinse it with cold water, and dry it with something more absorbent. Don't thing the Dairy Queen napkin will dry it . It will not, but it will clean it .