Results 11 to 18 of 18
Thread: A desperate call for help
-
03-10-2017, 02:43 PM #11
Well honing a full progression does not need to happen unless there is damage to the edge like a nick or otherwise. Touch up honing only when routine stropping has no effect on the pull or tug of the hair during a shave. But what I have found in touch up honing is about every 12-15 shaves. And what I mean by a touch up is about 10-12 light strokes across the finishing stone(s). No more or less usually. But like I stated in the case of my PRC that which this did not remedy it......had to take it back to a 1k to a 4k then 6k then to the finishers. It worked. Can't explain why it needed it all that far back but it did.
German blade snob!
-
03-10-2017, 03:13 PM #12
- Join Date
- Apr 2012
- Location
- Diamond Bar, CA
- Posts
- 6,553
Thanked: 3215So, what does the edge look like with magnification?
Most likely, you have not ruined the blade. But it is not always as easy to hone a razor as a video of a pro would make it look, or we would all be playing like Tiger Woods.
-
03-10-2017, 05:17 PM #13
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,304
Thanked: 3226I think you have answered your own question and as others have already said it is likely your edge is off.
Even if you attempt to follow Lynn's instructions exactly it will take more than 4 or 5 attempts at honing to get consistently good edges. You cannot hone by numbers as each razor takes what it takes to set the bevel properly and at each step in the progression.
All you need is a 10X to 20X loupe and a strong light to assess your edge to see if there is anything wrong. The trick is you have to know what to look for. If all else fails reset the bevel properly and hone up the progression.
Alternately you can have the blade professionally honed and check,when you get it back, what the edge like for a reference in the future. Do not strop your freshly pro honed razor before your first shave to give you a benchmark of what a good edge feel and performs like. That also eliminates your stropping as being a factor in dulling the edge.
BobLife is a terminal illness in the end
-
03-10-2017, 05:30 PM #14
- Join Date
- Mar 2017
- Posts
- 3
Thanked: 0Thanks guys. Time to give my blade a fresh start.
-
03-18-2017, 01:04 PM #15
- Join Date
- Dec 2012
- Location
- Omaha
- Posts
- 228
Thanked: 26Learning to hone properly takes time and patience. There seems to be a knack to it which I have not completely mastered. I thought I understood all the videos and archived articles I've read about honing but only recently came to realize some of the subtleties of the honing process that are easy to miss when reading those articles.
From what I have gleaned recently, there is a sweet spot of pressure on the hone -- not too much, certainly, but not too little.
Also there are some interesting threads I've seen on this and other forums about how to employ torque on the blade when you hone -- it is again a subtle thing but experienced honers do this intuitively I think.Steve
Omaha, NE
-
03-18-2017, 01:46 PM #16
- Join Date
- Nov 2016
- Location
- Chicago Suburbs
- Posts
- 1,100
Thanked: 292You never listed which hones are used in your three hone pyramid. If you are using 1K, 4K and 8K Nortons, for example, it may be that the edge off the 8K is simply not sharp enough for your current beard. You may need to add a finishing stone or pasted strops to make your edge sharper.
If you can afford to do so, purchase another straight razor (either new or vintage) from a vendor who inspects hones the blade before shipment. If the new blade shaves better than the old one, send the old blade off for honing to whomever honed it previously.
There are many ways of inspecting razor edges as you hone. Some use the thumbnail test, some use the thumb pad or three fingertip test, some use the hanging hair test. Some use loupes or microscopes to inspect the edge. Some use a combination of tests. Every one of these tests is useful, but they are all subjective. The only test than means anything is how the edge shaves your individual beard. Thus, you have to have to test enough edges to correlate these subjective tests with your shaving experience. With experience, the subjective tests can reasonably predict how your edge will shave your face.
As men age, our beards tend to grow more coarse. I am now a senior citizen with a coarse, fast growing beard. I have to have a very sharp edge to get a close shave. The coarse beard also dulls the edge more quickly. As soon as the edge begins to tug, I touch up the edge with a CBN paste strop. When that no longer works, I touch up the edge on my finishing hone. It is normally not necessary to go back to the lower grit stones.
-
03-18-2017, 02:21 PM #17
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,552
- Blog Entries
- 1
Thanked: 3795I may sound like a broken record, but where are you located? If we could find you some local help, then that would dramatically improve your chances of learning how to hone properly.
-
03-25-2017, 12:12 AM #18