Results 1 to 10 of 15

Hybrid View

  1. #1
    Junior Member
    Join Date
    Aug 2005
    Posts
    21
    Thanked: 0

    Default

    I started str8 shaving with a Feather Artist Club and moved to a regular str8 from Lynn (actually several, thanks, Lynn). I can relate to some of what you are saying. Some things I found.

    - It is easy to dull your razor by poor stropping. Make sure that you are lifting the blade away from the strop at the end of the stroke, and not digging it in as you see illustrated in old cartoon images of a barber stropping.

    - There is more feedback from a true str8 in terms of sound and feel. This is not really pulling so much, just a different sensation.

    - If your beard is tough (like mine) you have to have some momentum to the blade in your technique. Start the cutting motion just above the beard as you bring it down. If the blade has no momentum, it can "stall" and grab a heavy beard.

    - Use short strokes for that heavy beard. Experiment with what works best.

    - Using a magnifying mirror (carefully) can show you what is happening.

    - Try not to go directly against the grain - again the blade can stall.

    - Over time, you will get better and learn what works best on your face. You might try a heavier razor if your beard is tough.

    - At first, I thought that the str8 was inferior to the Feather. After awhile, I have learned that it is just as good, but requires a bit different technique. If you don't like that technique, or the feedback of a str8, consider the Feather Artist Club. Ray will tell you that it is his favorite razor, and it is awesome. But different.

    Bob

  2. #2
    Senior Member
    Join Date
    May 2005
    Posts
    135
    Thanked: 0

    Default

    Bob: YTou are right, the feather is different. I love the feel of a regular straight much more, in fact, there is nothing like it. i tend to get better shaves on my neck and near my ears with the feather straight as it has a shorter length of blade, allowing more manuerverability. but your suggestion of short strokes, i will try. i get the best shaves on my cheeks with straights, but they do not get as close as i would like on my neck. i have to touch up with the merkur DE razor.

    sam

  3. #3
    Junior Member
    Join Date
    Aug 2005
    Posts
    21
    Thanked: 0

    Default

    Sam -
    I would spend some time with your neck and a magnifying mirror. I just can't see how you could be doing so poorly there that a DE would be used for cleanup. I like my Merkur DE, but there is no way it could be as close as a str8 in my experience. Something sounds wrong there. What I like the DE for is speed if I am in a hurry. But I never seem to be in that much of a hurry.
    Bob

  4. #4
    Junior Member
    Join Date
    May 2005
    Location
    Finland
    Posts
    14
    Thanked: 0

    Default

    I just (really and finally) started shaving with a str8 week ago or so, and found out that the first few shaves were horrible, although I used pre-honed razors from Lynn and str8_razr (Andrew). Indeed, my face was red all over. I didn't get any bad nicks, though. The razor didn't seem to slide well enough on my heavy beard and I imagine shaving against the grain is still impossible at places. It also gave me kind of a dissatisfying feeling when the razor passed over the whiskers on the sides of my chin. I could say it hurted a bit.

    My stropping couldn't have been so bad since the razors still pass the hanging hair test after a week of use. I can clearly feel them becoming sharper after stropping.

    Now, after the first few days, the shaves have started gradually get better. It's quite amazing how things have changed and how my skin has adapted itself on the razor. In fact, last night I had a superb shave with almost no irritation whatsoever and only a small nick on my chin, healed with cold water.

    I have still much to learn on this: shaving my chin, shaving against the grain, etc., but there's no turning back now, as the sensation of shaving with a str8 is just so great.

    BTW, I've used 5/8 and 6/8 full hollows. I ordered a 6/8 wedge from Andrew few days ago and gonna try how it does the job.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •