Results 1 to 10 of 25
Hybrid View
-
04-26-2013, 04:56 PM #1
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,987
- Blog Entries
- 1
Thanked: 13234I have to agree with TBS above certain razors do better.. and certain spots are just a PITA
Things that have to come together just right for a successful pass..
1. The edge, this is number one on the list this has to be really really good not just sorta good
2. Your Technique must be up to the edge
3. The razor itself must be able to match #1 & #2
4. The conditions, basically the lather and the passes that came before have to be better than just OK
-
The Following User Says Thank You to gssixgun For This Useful Post:
crouton976 (04-26-2013)
-
04-26-2013, 05:20 PM #2
Thanks for the quick responses, gents.
Glen,
I know my lather is good (plenty wet, good cushion, blade moves very slick). Also, my WTG and XTG passes in these two spots are definitely comfortable (no tugging, skipping, etc.).
My edge SEEMS okay... though, even though it's shaving comfortably WTG and XTG (and even ATG on my cheeks), I still wonder if it could be better. Once I get my Norton set in (and, man, next Thursday REALLY needs to get here), I'm definitely going to see what can be done in the honing dept. to make a difference (with your videos playing all the while ). So far, this razor has only seen time on a DMT to remove some chips and a small crack, some 1k wet/dry paper and a LOOOONNNG time on my barber's hone and strop. Given all of that, I'm surprised it shaves so well.
As for my technique, well, I'm obviously still learning, but up until this last week or so, I haven't had an issue. I know something has changed for sure, it's just a process of elimination to figure out what, be it prep, edge, technique, blade geometry, etc.
By the way, I definitely want to thank you and everyone else here for being such a great community. All the knowledge and wisdom here is astounding, and I know I wouldn't have come as far as I have without you guys."Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead
-
04-26-2013, 06:22 PM #3
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,987
- Blog Entries
- 1
Thanked: 13234You have the right idea, you just keep adjusting one thing at a time and usually it will lead to success...
-
04-26-2013, 11:38 PM #4
- Join Date
- Oct 2008
- Posts
- 6,038
Thanked: 1195Yes, a smiling blade will help in the hollows of the neck . But changing equipment is not always a substitute for proper technique....
-
04-27-2013, 01:26 AM #5
The red circled areas are also some of the toughest for me. I found a pulling stretch, toward the back of my neck is key to getting those areas. Oddly enough, in my case, both the right and left hollows respond best to pulling toward the right side. Early on I tried pulling the left side to the left and the results weren't good. Pulling toward the right did the trick I also have to manipulate the razor in a partially XTG, ATG direction. Not true straight up ATG but on an oblique angle to the vertical. Anyway ..... give it a shot.
-
04-27-2013, 01:56 AM #6"Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead
-
04-27-2013, 03:32 AM #7
I have a similar beard, probably smaller, very tough hairs. A low profile to start the stroke is necessary for me on the ATG. also, shorter strokes with good lather present are a must. Sometimes, a blade must "dig" to get through, but let it go through at it's own pace, as it were! Heavy growths are hard on blades! Always were, always will be!
"Don't be stubborn. You are missing out."
I rest my case.
-
04-27-2013, 04:54 AM #8
- Join Date
- May 2010
- Location
- Lafayette, LA
- Posts
- 1,542
Thanked: 270That was dangerous for me to learn. I still have to be careful and frankly am more successful some days than others. But that's part of the fun. Safety razor shaving bores me if I do it 3-4 days in a row. I don't get bored with a straight because I enjoy the challenge and the superior results.
I think the Merkur 37C Slant safety razor is better than all the other safety razors because it attacks hard to get areas in much the same manner.
Straight razor shaver and loving it!40-year survivor of electric and multiblade razors
-
05-01-2013, 03:36 PM #9
For me it has been a good skin stretch, a perfectly honed and stropped blade, care to brush up the hairs when applying lather and an aggressive angle on the blade. This works for me whether its a smiler or a straight blade.
-
04-27-2013, 01:54 AM #10"Willpower and Dedication are good words," Roland remarked, "There's a bad one, though, that means the same thing. That one is Obsession." -Roland Deschain of Gilead