Thread: 10/8 Half Hollow Joseph Rodgers & Sons Straight Razor with Barbers Notch

Based on the info that I have learned here over the years, I am going to try my best and accurately describe this straight razor. Please correct my vernacular if it's wrong so that I can continue to learn. This razor is part of my recent acquisition found here.

10/8's Half Hollow Straight Razor with Barbers Notch made by Joseph Rodgers & Sons in Sheffield England. Based on the double stabilized shoulder, this razor probably started its life as a wedge or near wedge. I believe that I can see the grind marks on both faces of the blade.

The stamp on the tang reads, "Cutlers To Their Majesties". "Their" is referring to Queen Victoria and Prince Albert of Saxe-Coburg and Gotha. Meaning this carbon steel razor was most likely made between the years of 1840 - 1901. Judging by the shape of the tail design I would guess that it was made closer to 1840.

There is no visible rust. The razor has aged patina consistent with razors of this time period. Very little hone wear so overall the previous owner took great care of this razor. The pivot pin is tight. The razor will stay open on its own but if you tug on the blade hard enough there is some play going towards and away the heel edge .

The scales appear to be black horn. Although not perfect they are in good condition. The 1840's style small brass hardware appears to be original.
The tapered wedge is probably lead but I can't verify this?

Since I haven't sharpened a razor yet I can't comment on the edge or bevel but any other descriptors that I missed please let me know.

Thanks

Cheetah

Nice.
Looks like you will lose some of that width getting a clean bevel, but hopefully not much.
Or it could be that my eyes need some help.

Nice catch either way.

Originally Posted by cheetahmeatpheonix

Based on the info that I have learned here over the years, I am going to try my best and accurately describe this straight razor. Please correct my vernacular if it's wrong so that I can continue to learn. This razor is part of my recent acquisition found here.

10/8's Half Hollow Straight Razor with Barbers Notch made by Joseph Rodgers & Sons in Sheffield England. Based on the double stabilized shoulder, this razor probably started its life as a wedge or near wedge. I believe that I can see the grind marks on both faces of the blade.

The stamp on the tang reads, "Cutlers To Their Majesties". "Their" is referring to Queen Victoria and Prince Albert of Saxe-Coburg and Gotha. Meaning this carbon steel razor was most likely made between the years of 1840 - 1901. Judging by the shape of the tail design I would guess that it was made closer to 1840.

There is no visible rust. The razor has aged patina consistent with razors of this time period. Very little hone wear so overall the previous owner took great care of this razor. The pivot pin is tight. The razor will stay open on its own but if you tug on the blade hard enough there is some play going towards and away the heel edge .

The scales appear to be black horn. Although not perfect they are in good condition. The 1840's style small brass hardware appears to be original.
The tapered wedge is probably lead but I can't verify this?

Since I haven't sharpened a razor yet I can't comment on the edge or bevel but any other descriptors that I missed please let me know.

Thanks

Cheetah

Nice Score!!

Personally since you apparently don't hone I'd send it out to a pro to do the honing (I have a personal favorite/PM me if you are interested). I'm quite sure that it would save as much of the razor's height as possible.

Also all I'd do for that razor is a good soak in Neatsfoot's Oil and use a metal polish for the blade.

With this said 'IF' you decide to use a Pro they will be able to advise you more than I can.

Again, That's a Very Nice Razor!

I don't think it is a re-grind and the grind marks show on many old blades.
Here is one I restored / honed and sold.



The new owner told me it was the best shave he had ever had.

That was very good spotting on your part.

Originally Posted by RezDog

That was very good spotting on your part.

Thank you kind sir!

You still buyin them old paint stirrers cheetah?
That beard must be tickling yer ankles by now...

Originally Posted by Grazor

You still buyin them old paint stirrers cheetah?
That beard must be tickling yer ankles by now...

I was just looking at my "friends list" on here the other day, Thinkin about you.
Cause you have the #1 spot...and here you are. I hope all is well. I couldn't pass up the whole lot. It had two 10/8's Joseph Rodgers & Sons so I figured that it was worth fighting for.

I hope that you are well my first friend...lol

Cheetah