Results 1 to 10 of 14
-
04-26-2011, 02:52 AM #1
- Join Date
- Apr 2011
- Posts
- 148
Thanked: 44 Razors (and a strop) found on a road trip
I found these 4 razors and strop on a road strip from East Tennessee to Southwest Louisiana
I can post more pics of any if anyone would be interested in them
i would also be interested in any information anyone can give me on these, especially information on the spanish point blade, is this a blade that is supposed to have a slight curve on it?
-
04-26-2011, 03:26 AM #2
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,544
- Blog Entries
- 1
Thanked: 3795Yes, the first razor, the one with the Spanish point, is supposed to have a curved blade. This is clear because the spine is also curved. Cleaning up that one will be the greatest challenge as there is a lot of pitting on it. Is that dark spot on the edge right in the middle as corroded as it looks? If so, that will make it a lot more work to get it sharp. It could be so bad that it might require a regrind to make it right. The others look like they have a lot of potential. The Larkin can be shortened. Is there any sort of maker's mark on the bottom one?
-
04-26-2011, 01:40 PM #3
- Join Date
- Apr 2011
- Posts
- 148
Thanked: 4the spanish has "william england's celebrated razor" actually looks worse in the pictures to me, here are some more pictures
the yellow handle has no marks whatsoever, it appears to be barely used, if it was used at all. the handle is very thin, and i think it is bone. The scales seem as though they are yellowed bone, and they have a crack near the pin, like some natural material i see in knives sometimes
-
04-26-2011, 02:40 PM #4
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,544
- Blog Entries
- 1
Thanked: 3795It will take some work, but even that first one can be rescued. It is encouraging (slightly) that the corrosion only appears mainly on one side. Honing, and likely grinding, will have to be done to remove the edge up past the top of that bad spot. Taking it that far up may get you into too thick of a region of the blade, requiring a re-grind to further hollow out the blade.
The bone scaled one is pretty nice and the scales could be rescued with an inner liner to stabilize the bone's crack.
-
04-26-2011, 02:44 PM #5
- Join Date
- Apr 2011
- Posts
- 148
Thanked: 4the yellowish scales on the unmarked razor seem to be bone as i said, but they are very very light, and very thin.
could they be something else?
i see a grain of some sort in it
could it be ivory? (how would i tell if it is? though, i doubt it, though if it is, i got it cheap, but that is beside the point)
-
04-26-2011, 03:02 PM #6
- Join Date
- Apr 2011
- Posts
- 148
Thanked: 4i think the spot on the blade is actually that, just a spot, though it looks as though someone sharpened it as a knife (it is a full wedge i believe)
i plan on browsing the workshop and trying to get all of them fixed up, i have a cheap razor that i will try restoring first
the bone scales (assuming i IDed them right), seem to be strong around the crack so far, i wont be using the razor much, i have a couple torreys that i like a lot and will learn on one of them
-
04-26-2011, 08:46 PM #7
I love the french point blade with the monkey tail. Who is the manufacturer?
-
04-26-2011, 08:53 PM #8
- Join Date
- Jul 2010
- Location
- Central new jersey, USA
- Posts
- 728
Thanked: 240
-
04-26-2011, 09:01 PM #9
Dang it, I knew the trunk lid didn't close right!
Thank you so much for finding these
my precioussss.....
really though that is a great findFind me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage
-
04-26-2011, 09:09 PM #10
- Join Date
- Apr 2011
- Posts
- 148
Thanked: 4the french point with the long tail is a joseph rodgers and sons, check this thread out for more info on it
http://straightrazorpalace.com/razor...led-razor.html