Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Junior Member Thumper's Avatar
    Join Date
    Oct 2008
    Location
    Las Vegas, Nevada
    Posts
    17
    Thanked: 1

    Default My limited experience with soaps/creams

    I'm having a confusing time of it - hope for some helpful feedback.

    I've now sampled a few different lathers - with widely differing results. For starters - I'm using a Kent BK4 for my brush - so if brush selection makes a difference please indicate as such.

    I started with a bar of Col. Conk's Bay Rum. Not terribly exciting. Unless somebody raves about it using a different technique, I'll probably never try it again.

    Then I tried some of Kent's soap. This lathers very nicely, gives a slightly better feel for me than Col Conk - but seemed to leave quite a bit of residue both on my shaver and in my sink. I'll leave it in the nice wooden bowl - probably for a looooong time....

    Then I tried a sampler pack of Colleen's soaps & creams. The soaps had incredible scents - I'm going to buy more products just for my closets. Lathering with the soaps was hit-or-miss, untill I followed Glenn's instructions. It really makes a difference when you can soak the soap in hot water for a while, and dissolve a quantity in the water before lathering up - especially with my soft badger brush. Unfortunately, while I've had one or two excellent shaving experiences with these soaps, I'm not consistent yet - but the scents make me want to keep trying.

    The creams were disappointing. They had a thick, paste-like texture. They lathered quite poorly, and I did not enjoy the shave. In particular, if someone has some insight on these creams, please share.

    Based on the Youtube videos from Mantic59, I tried the Kiss My Face cream (which I found at Vitacost.com). This is actually about the cheapest one I've used - and thus far is the 2nd best shave I've had thus far. Lathers immediately, voluminously, and lubricates quite well.

    Feeling somewhat confident in my DE technique, I then ordered a sampler from TGR. Lathering with this stuff was nearly a religious experience. This stuff is NOT cheap - but WOW what a feeling! The only thing missing - I still love the scents from Colleen's soaps. If TGR added her scents...price wouldn't matter.

    Anyway - I just wanted to share what I've gone through thus far, and I'd really like to hear if someone has had better experience with Colleen's creams.
    Last edited by Thumper; 01-28-2009 at 04:53 AM.

  2. The Following User Says Thank You to Thumper For This Useful Post:

    FloorPizza (01-30-2009)

  3. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I have only used Salter's creams in a tub. I find them to be very good. As far as soap I like Coleen's, QED, the Kent you mentioned which is Mitchell's Wool Fat I think. Also Trumpers, Harris, and Tabac.

    The BK4 is a very soft brush. It took me some time to get used to it and learn how to get the best out of it for me. I usually use a stiffer bristle such as a Rooney size 1 style 1. Very efficient in creating lather.

    There are many out there and it is a matter of trial and error. Usually if you find you don't care for a product you can get your money out of it by selling it in the classifieds. If you don't like it someone else may .
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  4. #3
    Super Shaver xman's Avatar
    Join Date
    May 2005
    Location
    Lotus Land, eh
    Posts
    8,194
    Thanked: 622

    Default

    Quote Originally Posted by Thumper View Post
    Then I tried a sampler pack of Colleen's soaps & creams. The soaps had incredible scents - I'm going to buy more products just for my closets. Lathering with the soaps was hit-or-miss, untill I followed Glenn's instructions. It really makes a difference when you can soak the soap in hot water for a while, and dissolve a quantity in the water before lathering up - especially with my soft badger brush. Unfortunately, while I've had one or two excellent shaving experiences with these soaps, I'm not consistent yet - but the scents make me want to keep trying.
    And so it begins. TGQ soaps are incredible. They have turned me from creams they're that good. Get the Leatherneck.

    I have found that the creams will congeal with time. You can soak a portion in hot water for easier lathering. Just as you soak the soaps. I don't soak the soap since our water is very soft here and it lathers readily.

    X

  5. #4
    Senior Member blabbermouth JimR's Avatar
    Join Date
    Dec 2008
    Location
    Japan
    Posts
    2,746
    Thanked: 1014
    Blog Entries
    2

    Default

    Don't soak soap. Seriously--don't do it. It will very quickly destroy your soap, and then you're SOL. To help with lathering, you can put a teaspoon or so of water on the top of your puck while you're showeinr or whatever, but anything more than that and you're asking for trouble, especially with glycerin soaps.

    You don't describe your technique, so that might be the problem. It's all a matter of water volume. You need to make sure that, with soaps, your brush isn't TOO wet when you start. Load your brush well, and then start to lather. As the lather builds, you will get a feeling for when you need to add a touch of water. Try feeling it with your fingers; if it's smooth and slick, it's fine.

    With the Kent/MWF, you said it left a residue. That tells me you're not using enough water, or your water is very hard. That can effect your lathering a lot.

    One thing, your BK4 is a very soft brush, or so I've heard, and may be somewhat difficult to get loaded with soaps. Creams should not be a problem, though, so I'm not sure what the issue there is; even a hardened cream should lather just like a soap.

    One piece of advice--stick to ONE product until you can use it. They all are a little different, and if you hop around too much you'll only end up confusing yourself. Stick to one product until you can lather it consistently, then try to change it up.

    Good luck!

  6. #5
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    +1 on what JimR said, just a splash of water on the puck while you are showering. Also, you mention Mantic's videos. If you follow his technique of lathering in a bowl and adding a bit of water as you go this may be more effective. It works well for me. I usually load the brush on the puck of soap and go to the bowl in which I have added an almond sized dollop of cream.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  7. #6
    Senior Member dward's Avatar
    Join Date
    Aug 2008
    Location
    Germantown, MD
    Posts
    1,686
    Thanked: 245

    Default

    Quote Originally Posted by Thumper View Post
    Then I tried a sampler pack of Colleen's soaps & creams. The soaps had incredible scents - I'm going to buy more products just for my closets. Lathering with the soaps was hit-or-miss, untill I followed Glenn's instructions. It really makes a difference when you can soak the soap in hot water for a while, and dissolve a quantity in the water before lathering up - especially with my soft badger brush. Unfortunately, while I've had one or two excellent shaving experiences with these soaps, I'm not consistent yet - but the scents make me want to keep trying.

    The creams were disappointing. They had a thick, paste-like texture. They lathered quite poorly, and I did not enjoy the shave. In particular, if someone has some insight on these creams, please share.
    Her soaps are the best I have ever used, period! The scents are superior to anyones'. And the lather provides the best performance I have experienced. That being said, I just got a tub of her cream. I have used it only once, so I do not have the corrections proportions down yet. I have read in other postings that you need to use more cream than with other brands when trying to develop the correct lather.

  8. #7
    Junior Member
    Join Date
    Nov 2008
    Posts
    22
    Thanked: 3

    Default

    I'm currently on the second puck of my sample from Colleen. I was immediately sold on the scent but not completely on the shave, until I switched water. The water at my house is about a 7.5 on the hardness scale (hard-very hard) and I couldn't get a consistent lather from the soaps and the one try with the creams was a disaster. I just bought a gallon jug of distilled water and what a difference.

    If you have hard water or are unsure try distilled water and see if that helps with Coleen's products. Best $0.79 I've spent in a while.

    My routine if it helps:
    1. Heat distilled water in a tea kettle. And transfer to my shaving mug.
    2. Dip the brush in the water and use the brush to dribble a little water on the soap puck (maybe 1tsp).
    3. Return the brush to the mug to soak while I shower.
    4. Empty the shave mug of water back into the gallon jug (what can I say I'm cheap )
    5. Shake out the brush
    6. Load with soap (10 seconds or so)
    7. Build lather while wishing she made after shave or air fresheners so I could enjoy the smell all day .

  9. #8
    Junior Member Thumper's Avatar
    Join Date
    Oct 2008
    Location
    Las Vegas, Nevada
    Posts
    17
    Thanked: 1

    Default

    Quote Originally Posted by effnish View Post
    If you have hard water or are unsure try distilled water and see if that helps with Coleen's products. Best $0.79 I've spent in a while..
    Hard water? Nah, here in Las Vegas we don't have hard water. Instead we use a solution that comes in a variety of colors and scents called liquid stone.

    I have some good filters that get out the chlorine and heavy metals - but the minerals are only "treated", not removed. I'll have to try the distilled water route.

  10. #9
    Junior Member Thumper's Avatar
    Join Date
    Oct 2008
    Location
    Las Vegas, Nevada
    Posts
    17
    Thanked: 1

    Default

    Quote Originally Posted by JimR View Post
    Don't soak soap. Seriously--don't do it. It will very quickly destroy your soap, and then you're SOL. To help with lathering, you can put a teaspoon or so of water on the top of your puck while you're showeinr or whatever, but anything more than that and you're asking for trouble, especially with glycerin soaps.
    I guess it depends on the definition of "soak". What I typically do is load my brush with water, then let it drain when held or gently tilted. Then I shake the brush out over the soap - it's usually enough to cover the soap about 1/8" deep. Then I shake the brush out, pour the soapy water into my lather bowl, swirl the dry brush on the softened soap, and return to the lather bowl to mix up.

    This last time, I scored the surface of the soap first with a blunt knife, then after I added the water, I set the soap dish into a tub of hot water. I think I got better results this way.

    Quote Originally Posted by JimR View Post
    One thing, your BK4 is a very soft brush, or so I've heard, and may be somewhat difficult to get loaded with soaps. Creams should not be a problem, though, so I'm not sure what the issue there is; even a hardened cream should lather just like a soap.
    The other creams I've tried have been fine - for some reason those two samples from TGQ just seemed poor. It could be my water, it could be I need to use more cream - or perhaps these two sample just happened to be "off". I AM curious if anyone here who enjoys TGQ products prefers the creams to the soaps - which would give me a reason to try them again.

  11. #10
    Senior Member TonyJ's Avatar
    Join Date
    Dec 2008
    Location
    Finland
    Posts
    164
    Thanked: 76

    Default

    Have you read these articles from wiki

    Illustrated Guide to Making Basic Soap Lather - Straight Razor Place Wiki

    Illustrated quide to making basic cream lather in three different ways - Straight Razor Place Wiki


    I have Kent BK 4 too and althouht softness it is a very good brush to create a suberb lather.

    Here is another wiki article where you can see differencies of brushes. To sum up boar's and pure badger's don't hold so much lather than e.g BK4.

    Brushes - Straight Razor Place Wiki

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •