Thread: Chromium Oxide Paste on hard linen

slightly off-topic...because I'm interested in this exact thing.

what tutorial? I've been looking for a good video tutorial of how to paste a strop and even in my short time here I've learned that Lynn is a few kinds of awesome.

I saw it a while ago, I believe it's part of the Wiki content.

This paste or crayon is actually quite good. I just rub it on the linen until you start to see the color on the linen. Don't cake it on. Once it's covered, then just 10-15 very light strokes and it should wake up the razor. Actually sometimes, just 5 strokes will work, so try less first.

Have fun,

Lynn

thank you Lynn. Will do!

Yeah..I must agree with Lynn...don't cake it on. One time I put Chrom-Oxde. on my linen strop, and at first I didn't use enough paste...so afterwards, I put it on fairly heavy...and boy-oh-boy did I regret it. For one, it removed so much metal that it actually dulled the razor. And in fact, I could actually see the removal of the metal with every few laps. A lesson learned!

I've had a love hate relationship with CrO. I have tried it on leather and hard linen with pretty good results, but I am very content with liquid CrO painted on balsa. It has a nice feel and you can stroke it as you would your hone. As already mentioned, start with fewer strokes and light pressure, then leather strop and HHT or ST. Go again if it needs more. I can go several months this way before honing the edge again.

I have a related question. when using Cro-Ox should you tape the spine to protect it like you would on a hone? If you use a layer of tape when honing do you use a layer of tape to keep the angle the same on Cro-Ox?

Originally Posted by jmbbabson

I have a related question. when using Cro-Ox should you tape the spine to protect it like you would on a hone? If you use a layer of tape when honing do you use a layer of tape to keep the angle the same on Cro-Ox?

Tape is only needed if you have the CrOx on balsa IMO.

This is actually a very good question.

You should typically use the same method (angle) that you were using on the stone, especially if you are trying to protect an ornate spine. However, at 0.5 microns CrO averages around 30,000 grit +/-?K. This is a very fine polish indeed and will probably just create a mirror finish on your spine. The other reason tape may not be critical is the pliability of the medium (i.e. leather, linen, paddle or balsa). By the way, on balsa I have never been left with a green residue on the blade - very clean medium. With or without tape, even with a light touch you should get pretty good coverage at the edge. OK, I have tried it both ways and found little difference.

I actually find that both .5 diamond and chromium oxide work best for me on the rock hard wool on the paddle, bench or hanging strop. The natural cushion of this material is perfect and normally 5-10 strokes is all you need. I have used this for thousands of razors with great results and not found the need to tape.

Have fun.