Results 1 to 9 of 9
Like Tree6Likes
  • 6 Post By gssixgun

Thread: how do I avoid getting the little feathering, micro-nicks on the sides of my strop?

  1. #1
    Do it Steveorocks's Avatar
    Join Date
    Sep 2011
    Location
    Los angeles
    Posts
    59
    Thanked: 4

    Default how do I avoid getting the little feathering, micro-nicks on the sides of my strop?

    how do I avoid getting the little feathering, micro-nicks on the sides of my strop?

    Thanks

  2. #2
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,947
    Thanked: 13221
    Blog Entries
    1

    Default

    They come from running the edge of the blade at an angle off the edge of the strop... Stop doing that

  3. The Following User Says Thank You to gssixgun For This Useful Post:

    Steveorocks (10-29-2011)

  4. #3
    what Dad calls me nun2sharp's Avatar
    Join Date
    Feb 2008
    Location
    Kansas city area USA
    Posts
    9,172
    Thanked: 1677

    Default

    Glen, the master of subtlety.
    It is easier to fool people than to convince them they have been fooled. Twain

  5. #4
    Senior Member jerrybyers's Avatar
    Join Date
    Aug 2011
    Location
    Aldie, VA
    Posts
    226
    Thanked: 26

    Default

    Are you noticing them on the inside of the strop closest to your body? If so, that's usually where you see those "micro-nicks." You are pulling the blade towards you and bringing the blade off the strop like you would in an X-stroke. The problem is that you're laying the blade down before moving it forward again and the blade is coming across the strop at an angle and nicking the strop. It's pretty common; just watch your stroke and try to keep the blade perpendicular to the motion.

  6. #5
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    It's as easy as lifting up your wrist. Sometimes you might tend to drop your wrist slightly on the return stroke (towards you), so by elevating your wrist and elbow you will avoid those micro nicks. It also helps if you twist the strop somewhat towards your body.
    Last edited by Ryan82; 10-30-2011 at 04:53 PM.

  7. #6
    The Assyrian Obie's Avatar
    Join Date
    Mar 2009
    Location
    Milwaukee, WI
    Posts
    11,145
    Thanked: 2755

    Default

    Quote Originally Posted by gssixgun View Post
    They come from running the edge of the blade at an angle off the edge of the strop... Stop doing that
    Hello, Steveorocks,
    My good friend gssixgun is quite correct on this. Practice and awareness should resolve your problem. Also, don't forget to keep the pressure light.

  8. #7
    Do it Steveorocks's Avatar
    Join Date
    Sep 2011
    Location
    Los angeles
    Posts
    59
    Thanked: 4

    Default

    Well it's gotten much better, although I have found I should not strop or shave when hung over.
    I put a good slice in my strop, I guess better than my face

  9. #8
    Sharp as a spoon. ReardenSteel's Avatar
    Join Date
    Jul 2009
    Location
    Nowhere in particular
    Posts
    2,409
    Thanked: 472

    Default

    That's why it's a good idea to have a DE in your roatation, just in case you need to shave but don't have the time and/or the full concentration needed to devote to a straight shave.
    Why doesn't the taco truck drive around the neighborhood selling tacos & margaritas???

  10. #9
    Junior Member
    Join Date
    Nov 2011
    Posts
    7
    Thanked: 0

    Default

    I'm a beginner, 20 daily shaves in. After about 2 weeks, I had found that my blade, which had been expertly honed by Lynn, had become so dull that it was barely cutting at all. Needless to say, poor stropping technique was the source of my problem. Lynn suspected that I was lifting of the strop at the end of each pass, which was absolutely true(I have no idea how he knew that...), resulting in rolling the edge. Since then, I have concentrated on keeping the spine down on the strop at all times, including during the changes in direction, and of course using minimal pressure. As a result of this adjustment, my stropping is improved, and I've also noticed that I'm no longer nicking the edges of my strop. For me the nicks seem to have been related to this "lift off/landing" effect at the end of my strokes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •