Results 1 to 10 of 29
Hybrid View
-
09-25-2012, 12:41 AM #1
- Join Date
- Aug 2006
- Location
- Maleny, Australia
- Posts
- 7,977
- Blog Entries
- 3
Thanked: 1587I agree - pressure can be useful under the right conditions. It's always the same old story - gaining enough experience to know when and where and what. We can help with advice, but in the end the best teacher is often trial and, I'm afraid to say, error.
James.<This signature intentionally left blank>
-
09-25-2012, 03:22 PM #2
- Join Date
- Sep 2010
- Location
- Calgary, Alberta
- Posts
- 160
Thanked: 2Thanks everyone for the advice. I think I have a better idea about stropping. I will keep a lookout for STROPTOBER, that should be interesting.
-
09-25-2012, 03:37 PM #3
- Join Date
- Jul 2012
- Location
- Central Missouri
- Posts
- 1,690
Thanked: 247The thread is already up...but the entries thus far may or may not be helpful (mine is no more than me showing my stropping from several angles)...
http://straightrazorpalace.com/strop...st-2012-a.html
-
09-28-2012, 06:18 PM #4
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 458It varies with the leather, to me at least. I can keep an edge up for quite a while with horse butt as long as after the first 25 shaves or so, when the edge seems to go a little, I add more pressure to the stropping stroke from time to time. It'll easily push an edge to 50 shaves like that.
I never had the same luck with cowhide, but cowhide isn't as hard, and at least fresh, horse butt has more effect on the edge (so much so that in raw from it's too abrasive for a while).
That's relevant conversation for a horse butt hanging strop. Spine on the leather and entire edge makes contact with the strop during a stroke, with the former being necessary no matter what and the latter being a preference so that the whole razor is evenly stropped without thinking about it.
-
10-05-2012, 02:21 PM #5
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 7,974
- Blog Entries
- 1
Thanked: 2204When I am teaching new guys how to strop I demonstrate and show them that I gauge my pressure based upon the amount of deflection in the strop. I try for 1/2" to 1" of deflection. Of course that assumes that the strop is held taut. But.... I also only use strops with a very slick surface ( mostly vintage horsehise ( shell)), no latigo or crisp cowhide strops.
Last edited by randydance062449; 10-05-2012 at 03:00 PM.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin
-
10-06-2012, 06:03 AM #6
- Join Date
- Sep 2010
- Location
- Calgary, Alberta
- Posts
- 160
Thanked: 2Using softer leather like cowhide, would someone use less pressure than horsehide. The strop I have is from Whippeddog. I think it is bridle leather.
Thanks
-
10-06-2012, 12:33 PM #7
- Join Date
- May 2005
- Location
- Saint Paul, Minnesota, United States
- Posts
- 7,974
- Blog Entries
- 1
Thanked: 2204Hmmmm....your doing the same thing I do when starting something new...I over engineer and make things far more complex than they need to be.
So, start by using the same pressure then experiment and adjust from there.
Just be sue to keep both the edge & the spine in contact with the leather during the stroke. Most new guys think the edge is fragile and fail to keep it on the strop. That is the most common mistake, then your wasting your time. The second most common mistake is to use a fast stroke. That leads to lack of control over both pressure and keeping the edge & spine on the strop.
Take it easy, a full round trip lap should take anywhere from at least 1 second to 4 seconds. Enjoy the process, don't rush it.
Well, I have rambled long enough, time to finish my first cup of coffee for the day.
Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin