Results 1 to 10 of 14
-
12-01-2013, 04:48 PM #1
- Join Date
- Nov 2013
- Posts
- 23
Thanked: 1How would you treat this leather to make a strop?
I got some English natural veg tan leather belt blank 3inch wide and 2.8-3mm thick to make some strops (one with chromium oxide and one without). Most of the leather is nice and uniformly even but this bit isn't:
(Popup blockers on for Imagebam!)
Its kind of twisted and feels firmly so. At this point in time I am not sure which way to go with the twisted piece but I'd like to go with which ever direction gives me the most stable flattest strop.
What would you say that would be? To try and flatten and use as a hanging strop or to see if I can glue it flat to a piece of level wood? Or something else?
-
12-02-2013, 04:09 AM #2
I have no special knowledge of leather, but having it pressed flat under some weight when it is wet and allowing it to dry when it is held flat might help. If you glue it to a board, I would put a lot of weight on top of it while the glue is drying. Cutting it into shorter pieces might also allow it to lay more flat. It appears the twist may be in the middle of the piece, so maybe remove that part. Keep in mind all you have to lose is a twisted piece of leather. I wonder if the tanning process left you with a problem that will be difficult to remedy no matter what.
-
12-03-2013, 01:42 PM #3
- Join Date
- Nov 2013
- Posts
- 23
Thanked: 1Thanks I may give that a go on the twisted part.
-
12-03-2013, 03:40 PM #4
- Join Date
- Apr 2008
- Location
- Essex, UK
- Posts
- 3,816
Thanked: 3164Not sure about the leather you have got, but wetting veg-tan usually makes it harder - they use that process for moulding it into knife sheaths and holsters. I would think the addition of oils, like you find with saddle soap, would help keep it pliable, but it will darken a lot and alter the surface dramatically. I usually just throw away anything twisted like that.
Regards,
Neil
-
12-04-2013, 04:27 PM #5
- Join Date
- Nov 2013
- Posts
- 23
Thanked: 1Ah OK. You seem to have likes on your side too so maybe that is the way. I've just visited because I was about to ask the seller this question and wanted the url. I will report any advise they give as they seem to specialise in leather on ebay.
-
12-04-2013, 04:39 PM #6
I can't speak for others but for myself, when Neil speaks, I listen and I listen very well!! He is a wealth of knowledge!!
He's also a great guy!
If you haven't read it already, you may find this very interesting!!
http://straightrazorpalace.com/conte...il-miller-324/
Sanfte Rasur, mein Klingenbruder!
(Smooth Shaving My Brother In Blades)Our house is as Neil left it- an Aladdins cave of 'stuff'.
Kim X
-
The Following User Says Thank You to cudarunner For This Useful Post:
Neil Miller (12-04-2013)
-
12-04-2013, 06:03 PM #7
I'm w/ Cudarunner.
-
The Following User Says Thank You to pinklather For This Useful Post:
Neil Miller (12-04-2013)
-
12-16-2013, 04:08 PM #8
- Join Date
- Nov 2013
- Posts
- 23
Thanked: 1Ah OK. I'm still new to the site and have yet to learn who the 'good posters' are
Pity the ebay seller never replied all the same
-
12-16-2013, 10:47 PM #9
As I've said in a previous post regarding Neil, I love to see someone love what they are doing. The result, I feel, shows pride in their work and there is just a lack of that these days.
I come from a family where all the men were trades/craftsmen. None of it mattered a great deal when I was growing up so little was passed on (see Newcastle in the 1980's). My father and his generation are really quite good with their hands. Me, well my wife has an ambulance on standby every time I get a screw driver out
This gives me a new appreciation for the man, it really does. At the risk of offending others who offer the same services, I don't trust anyone else with my blades and I'm in love with my "starter" strop.
Thanks for this post cudarunner.
-
The Following User Says Thank You to DaveTheGeordie For This Useful Post:
Neil Miller (12-17-2013)
-
12-17-2013, 07:19 PM #10
- Join Date
- Jul 2011
- Posts
- 2,110
Thanked: 459I'll offer a differing opinion. I wouldn't do anything to the leather if it's clean and smooth. Here's what I would do. I would clamp it to something (where the hardware would be) or fit it to something and for a couple of weeks, I would strop a razor on it 50 strokes each day - a different one that I was shaving with. A couple of weeks or a month of that will tell you what direction it's going. Once the surface is broken in a little bit, then you can try a strop on it with your razor.
Leave it hanging vertically so that it's not collecting any dust (which would throw off your perception) when you're not conditioning it.
I have never been a fan of overtreating leather for strops, you never know if you're helping the strop and change should be incremental if you make it, and not drastic.
IF you do that and it doesn't work out, then you can use a marking knife or some stout sharp knife against a straight edge and cut it and glue it smooth side up to a board. Personally, I prefer an even layer of liquid hide glue and significant clamping pressure where the leather is glued to a board and another is clamped right on top of it to distribute the force of the clamps. I've done that with horse butt and veg tanned cowhide and both have turned out great.
And to my point about not treating yet, my best strop is a piece of smooth horse butt about 2 feet long. It was rough at first (silica or whatever in the horse butt strips) but has settled in to a sheen that is near reflective and that does a great job. I used the same routine as I mentioned above. It has been my daily strop now for two years, and is better performing than any purchased strop I've had, despite the fact that it has never been treated with anything.