Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14
Like Tree2Likes

Thread: My strop has curled at the edges and bowed towards the center

  1. #11
    Member TMJudd's Avatar
    Join Date
    Jul 2014
    Location
    Texas
    Posts
    63
    Thanked: 1

    Default

    Quote Originally Posted by Razorfeld View Post
    Being of a heavy, heavy hand and ruining a couple of edges stropping. To encourage lighter pressure I cut 1/4" pressed wood the width of my strops and about 2" shorter than the length and secured them between the linen and the leather with Velcro straps, top and bottom. In essence, hanging bench strops. It has made me, now, get to using feather light pressure, if any, to strop my edges. Have had great edges since. Only treatment is rubbing the leather with my palm before using.
    It's funny that you say that. As green as I am, I have already considered the ramifications of accidentally using too much pressure while stropping, as well as sometimes catching myself letting the hanging strop get a bit slack while mostly concentrating on not putting any pressure on my blade while stropping it. That's where the stainless backing came to mind. It kills two birds with one stone. Since my strop has bowed, I've resorted to stropping in a somewhat different manner that I am liking. After shaving I clean/dry my blade. After that I give it a few laps on the felt to insure it is dry and micro fibers are somewhat straight. After the felt I put the blades to a piece of 'glass'! I start of with a few stropping laps to further straighten micro shards, then I give the blades a few 'honing' laps with the edge leading, followed by a few more 'stropping laps with the spine leading. I'm getting some really crazy crisp/sharp/smooth edges by doing this. I'm almost afraid to put my blades to the leather, anymore, for fear of accidentally curling the edge due to a slightly bowed strop, under tension, while being stropped correctly. I'm beginning to love my 'glass' strop!
    "A man cannot be comfortable without his own approval"... Mark Twain

  2. #12
    Moderator Razorfeld's Avatar
    Join Date
    Jul 2013
    Location
    Forest Grove, Oregon
    Posts
    5,152
    Thanked: 1226

    Default

    TMJudd, As is true in life, so it is true in how to get where you want to go. You have found a way to keep the edge on your razor that alleviated your concern of ruining it. Another path to traverse to the finish line. Again, the adage YMMV. It's not how you got there, it's the fact you got there.
    TMJudd likes this.
    "The sharpening stones from time to time provide officers with gasoline."

  3. The Following User Says Thank You to Razorfeld For This Useful Post:

    TMJudd (07-24-2014)

  4. #13
    Senior Member blabbermouth
    Join Date
    Jul 2011
    Posts
    2,110
    Thanked: 458

    Default

    I've used various 3" strops when I first started shaving and inevitably they all had a little bit of cup. I then made a horse butt strop (from a butt strip) that was close to 3" wide and it cupped. I cut it back to just over 2" two years ago, and I have never used a better strop of any type or had better shaves, and I have bought everything from horween shell to the kanayama 80k. My go-to is a strop that probably cost me $15 in leather, and a vintage stiff treated linen that cost me $30.

    That may not be helpful if you want to keep using your strop.

    When I was using 3" strops, I would run my hand the length of the strop each morning bending the edges down so as to crown it, but you run into the opposite issue then, where you can develop a ridge in the middle.

    This kind of stuff is the same reason vintage stones used to be 2" wide instead of 3", as when the strop, stone, whatever is not wider than the tool on it, deviation develops only in the length and not in the width.

    If you want the strop to not cup at all, you have to work the entire width of what you have, and then it will stretch in length, but we obviously don't care about that at all.
    TMJudd likes this.

  5. The Following User Says Thank You to DaveW For This Useful Post:

    TMJudd (07-24-2014)

  6. #14
    Member TMJudd's Avatar
    Join Date
    Jul 2014
    Location
    Texas
    Posts
    63
    Thanked: 1

    Default

    The strop has pretty much flattened out now. It took 2 separate oil treatments, on the backside, plus a few days time for the Neatsfoot to soak in and do its thing. There's still a very slight 'crown' running along the centerline of the strop, but not much. It seems to work well now. My two razors both have smiling edges and the slight curve seems to give me a good visual reference while doing X patterns and sweeping the blade like a windshield wiper. Maybe its not a good visual reference at all. Perhaps its just fun to watch, coordinate and feels a bit therapeutic, lol. My new strop showed up today. Its an English Bridle, vs the Latigo that warped. I've already given my razors a few laps across the new strop, just because I wanted too. I'll not be oiling this one. I'm curious to see if it warps all by itself, without my help.
    "A man cannot be comfortable without his own approval"... Mark Twain

  7. The Following User Says Thank You to TMJudd For This Useful Post:

    Blistersteel (07-25-2014)

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •