Thread: Noob question on pastes and sprays

Originally Posted by Splashone

Since the means of using either sprays or pastes involves stropping and you already suspect your stropping is not "up to speed." what do you expect to accomplish by adding abrasive to the mix? Get the razor rehoned and continue learning. Otherwise you will have razor even more messed up and a contaminated strop to add to your misery.

+1 I don't like paste either, just something else to keep up with and also kind of messy. I have found a finisher makes better edges anyway.

Different paste do different things, depending on the shape and size of the grit. Generally Diamond will sharpen more aggressively and Chrome Oxide will smooth more, while also adding sharpness. Both are abrasive strops removing microscopic amounts of metal.

Firstly, you problem is a stropping issue and common to novice stroppers, too much pressure and in the wrong places. If you use excessive pressure the whole razor pushes down and the strop roll up over the spine and the edge. As it rolls over the edge it curls the thin edge and can break or abrade the edge. Just one stroke can damage or dull it.

To prevent this issue, keep the strop taught, use very light pressure, and or put a bit of pressure on the spine, lifting the edge by putting your finger on the spine on the push stroke and your thumb on the spine on the pull stroke. Always keep the spine on the strop.

Or just use lite pressure, weight of the blade, while stropping and use more laps at least 100.

The damage to your edge can possibly be corrected by proper stropping, but paste will do so much quicker. .5 Diamond is great for reviving an edge and Chrome Oxide for smoothing and weekly maintenance, will keep you shaving for a long, long time, years.

For a novice I recommend a pasted paddle strop to prevent a rolled edge. Cut a 3 X12 inch piece of foam core board and paste the rough side with quality Chrome Oxide 3 in X’s. Just remember to use lite pressure.

I add to the above post by Euclid,,,you might also try to lay your hanging strop on a flat surface and go a couple hundred laps to see if you can improve that edge. A paddle strop takes some of the learning curve out of it and laying your hanger flat will help.

Where are you in the world? There may be member near by to help. I have all the pastes and prefer .5 crox on balsa. Saves my hanging strops from being soiled. You may also look at finish hones or barbers honed for touch ups

I am in the Cincinnati, OH area. I am considering buying a modular paddle strop in addition to my hanging strop to try different pastes and make stropping easier.

Originally Posted by EthanAThomas

I am considering buying a modular paddle strop in addition to my hanging strop to try different pastes and make stropping easier.

do it. I did and it was a game changer in my learning curve!

Originally Posted by Haroldg48

do it. I did and it was a game changer in my learning curve!

+1 to the SRD Modular paddle.
Not only for touching up, but as an every day and travel strop.
Gssixgun has a great thread on maintaining a razor using a schedule of paste touch ups that I used as a guide.

Originally Posted by Euclid440

The damage to your edge can possibly be corrected by proper stropping, but paste will do so much quicker. .5 Diamond is great for reviving an edge and Chrome Oxide for smoothing and weekly maintenance, will keep you shaving for a long, long time, years.

This should be emphasized...years, without honing. We may choose to do otherwise if we want (I'll admit to honing perfectly good razors just out of curiosity for what a stone does), but even a good vintage linen and leather should allow an experienced shaver to go 6 months with any razor (I have done that, before razor purchasing excesses) and probably a year for a good razor. An experienced shaver with chrome ox could probably go indefinitely...until some future decade where they bumped the razor accidentally and dinged the edge.