Results 1 to 10 of 50
Thread: New Strop Recommendations
Hybrid View
-
11-14-2018, 07:06 AM #1
Kanoyama 10k (or something a bit higher) could be a good choice for a somewhat experienced user. Fendrihan and Aframes have them I think.
-
The Following User Says Thank You to Srdjan For This Useful Post:
Pete123 (11-14-2018)
-
11-14-2018, 10:35 AM #2
- Join Date
- Feb 2018
- Location
- Manotick, Ontario, Canada
- Posts
- 2,775
Thanked: 552When you are ready for a good strop, you have to consider a number of factors: hanging or paddle or bench, draw, width, handle or barber style, type of leather, type of secondary strop if any and cost. That’s a lot to think about unless you have had some experience with those variables. Here’s a capsule of my own strop history.
I was fortunate to inherit a very good vintage barber style Japanese shell horeshide strop and didn’t really appreciate what I had for a long time. It has a slick draw and a smooth linen secondary strop. I use it as a finishing strop before shaving.
On the recommendation of the fellow who sold me my first new TI razor, I bought a 3” bridle bench strop as a starter purchase and a also/felt paddle strop for diamond spray and CrOx. That worked well in combination with my shell strop for many years.
A few years ago I bought a 1 1/2” Herold paddle strop for the cottage - leather on both sides, horizontal slots in the wood to mimic stropping on a hanging strop. It has a somewhat heavier draw than the Japanese strop and absolutely required X-strokes that the bench strop did not. Recently, I acquired a short vintage 1 1/2” German hanging strop with a much heavier draw and a smooth linen secondary, also for the cottage
Finally, this year I bought a Horween 3” strop from ScrupleWorks - a very good strop, but with a much heavier daw and a coarser fabric secondary strop. At the vendor’s recommendation, I got it made with handles rather than barber style - he suggested 3” was going to be hard to properly manage without a handle, and he was right.
I did not mention the mid-quality hanging strop I sliced up before buying the bench bridle strop :-(. Fortunately, I managed to avoid damaging the Japanese strop, which I have learned from some of the folks at SRP might have been made by the master himself about 50 years ago. That was more dumb luck than good planning.
Bottom line: after using a paddle strop to learn proper stropping technique with a minimum amount of damage to the leather, finding the right next strop for me was a journey. I use all of my strops and find each one has a different feel. I’m still experimenting with them and enjoying the experience. And, I feel lucky to have only destroyed one on the way.David
“Shared sorrow is lessened, shared joy is increased”
― Spider Robinson, Callahan's Crosstime Saloon
-
-
11-14-2018, 11:00 AM #3
Once in the high quality tier of strops, I think it mostly boils down to personal preference.
Looks and strop/leather feel / feedback will do a lot.
-
The Following User Says Thank You to TristanLudlow For This Useful Post:
Pete123 (11-14-2018)
-
11-16-2018, 09:13 PM #4
My 2c. Started with a cheap strop from Razor Emporium. Meh. Not too exciting but knowing the strop would take a beating due to being my first it did the job. Have not touched it for a while. Started collecting Japanese strops. Accumulated a bunch of them, restored some of them and was very happy. Then one day I decided to try Roo. Ordered one from Gabe, he is here on the forum. Man. Really really good. I had it made to the same size like a Japanese strop, same width, no handle or rings. Plain and simple.
Roo is very thin but not wimpy at all. The leather adjusts to the blade and honestly at this point I prefer it to the thick Kanayamas. Not selling them but not using them as much.
Gabe's strop is the light color one in the middle.
-
11-17-2018, 12:45 PM #5
-
The Following User Says Thank You to Badgister For This Useful Post:
gabrielcr78 (11-24-2018)
-
11-17-2018, 01:13 PM #6
Get some cloths for your strops!
https://straightrazorpalace.com/move...ml#post1848396
-
11-17-2018, 01:36 PM #7
-
11-17-2018, 01:35 PM #8