Results 1 to 10 of 20
Thread: Homemade Kangaroo Strop
-
04-06-2019, 03:15 PM #1
Homemade Kangaroo Strop
I love my "Kangaroo" strop (though it's actually just a very nice piece of horse shell), but have wanted an actual "Roo" strop since I tried one at the Asheville meetup years ago:
Here little buddy-I just want to scratch you behind the ears-honest!
Anyway, I was going to get one of Gabe's highly-regarded roo strops, but I decided to save some money and make my own. So I got all the hardware from Razor Emporium, and a really nice pre-cut brown roo piece from the Aussie seller "Outthere09." The hardware is basic, workman-like gear, nothing fancy, but sturdy enough to do the job-about what I expected. I suppose I could upgrade the Chicago screws if I want to get fancy, but this was not intended as a fancy piece.
I was pleasantly surprised by the 'roo piece, which got here surprisingly fast, expertly rolled and packaged-just a quality piece for a very reasonable price! At 600x75x1mm, it provides a nice long stropping surface of 21"x3." Really, as everything was pre-cut, it was more assembly than actually making anything. I cut and shaped the corners, and punched the screw holes with a leather punch-easy peasy!
Top end front:
interestingly, the back side is surprisingly silky, almost like a finely-napped suede, and is also a very fine stropping surface with a totally different character from the front side:
In practice, it's a very loud, "singing" strop, especially on the front side. It's very thin and strong, and almost feels and functions like a drum head when stretched out. The back side is much quieter and smoother. I've tried it on a few curvy Sheffields, as I know some of you guys like Mike/Outback feel that the deflection of such a thin piece strops those outer curves more efficiently-we'll see what tomorrow's shave says.
Anyway, I'm very happy with this set-up. Not sure yet where it will fall in my stropping "progression" (yeah, I do that lol!), but it's a nice addition, and would probably work just fine on its own. You guys who are posting looking for options for strops, it's just one more way to go. I put about $75 into the materials, for what it's worth. Aaron/SHDThere are many roads to sharp.
-
The Following User Says Thank You to ScoutHikerDad For This Useful Post:
randydance062449 (04-10-2019)
-
04-06-2019, 04:09 PM #2
75 is not bad. Nice job on putting it together. I have an SRD Roo strop. Its nice. And yes, they are a bit noisey. Papery sounding. Congrads on adding a Roo to the collection.
It's just Sharpening, right?
Jerry...
-
04-06-2019, 04:42 PM #3
I find myself reaching for that strop, more than any other, Aaron. Always the last strop in a progression, and daily stroppin, mostly.
Mike
-
04-06-2019, 05:34 PM #4
Love my kangaroo strops. I have the srd one and a travel one that was made by a member here many years ago.
Kangaroo leather has an amazing draw and is my go to choice for final leather. Been thinking about getting a new one to replace my old one whic is over 10 years old.
-
04-06-2019, 07:56 PM #5
- Join Date
- Nov 2016
- Location
- Chicago Suburbs
- Posts
- 1,098
Thanked: 292I have a "Roo" strop from SRD. I ordered a 3" strop and unfortunately, the hide is slightly cupped side to side. It is still usable, but not ideal. I was planning to order a replacement Roo piece and glue the cupped leather to a backing to use for pasted strops. Unfortunately, the replacement was out of stock and they never replenished the inventory. Maybe I will look into the Aussie source you referenced.
Generally, I use several strops in sequence as my stropping progression. I usually start with a heavy draw Latigo strop and then go to a Shell Cordovan and the Roo strops, both of which have medium draw. Then I finish either on a Fast Bridle cowhide, Russet Horsehide, or Novotan Horsehide strop, all of which are very fast draw. I have not done enough controlled experimentation with the strops to know which stropping sequence produces the best edges. With six strops, there are two many possible combinations.
-
04-06-2019, 08:05 PM #6
- Join Date
- Sep 2018
- Location
- Palm Harbor Fl
- Posts
- 373
Thanked: 49Most old barbers used horsehide. Thats good enough for me! I had an srd roo that cupped badly, a black latigo, big daddy etc. The only leather I haven't given away is my kanayama and an old russian shell strop. I personally don't think it matters what you use. But horsehide is a pleasure to use and maybe that's why they used it.
-
04-10-2019, 03:37 AM #7The Heirloom Razor Strop Company / The Well Shaved Gentleman
https://heirloomrazorstrop.com/
-
04-10-2019, 04:19 AM #8
+1 Most commercially sold roo hide is very thin. Some of the mountain greys that I've shot in the past had crazy thick hide especially across the spine but even so they always tanned very supple.
For the DIY guys who like slick draw try to score some falconry grade roo. Itz verry niiiizzze.The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.
-
The Following 2 Users Say Thank You to onimaru55 For This Useful Post:
FatboySlim (04-12-2019), randydance062449 (04-10-2019)
-
04-10-2019, 11:52 AM #9
Also heard veggie tanned roo leather is better than the chrome tanned.
Also here’s a picture of my travel roo strop. Folds up nice and compact.
-
04-10-2019, 04:35 PM #10
- Join Date
- Feb 2015
- Location
- Duluth, GA - Atlanta OTP North
- Posts
- 2,546
- Blog Entries
- 1
Thanked: 315Nice looking strop. I knew Mike uses his a lot so that had me interested in the material. I didn't know it was THAT thin. Pretty cool.
- Joshua