Results 1 to 8 of 8
Thread: how do i fix a nicked strop
-
12-28-2009, 04:44 PM #1
how do i fix a nicked strop
I have an SRD strop that I have nicked a few times and a pumice stone. Where do I go from here?
-
12-28-2009, 05:51 PM #2
- Join Date
- Mar 2008
- Location
- Berlin
- Posts
- 3,490
Thanked: 1903Preferably to the Wiki: Strop treatment and repair - Straight Razor Place Wiki.
-
12-28-2009, 06:14 PM #3
Time machine!
Some materials will respond better to "repairs" than others. I hope it works out for you.
-
12-28-2009, 07:59 PM #4
-
12-28-2009, 09:17 PM #5
- Join Date
- Mar 2009
- Location
- Central Texas
- Posts
- 603
Thanked: 143Coincidentally, I just fixed a nick in my Tony Miller. (Feeling better now Tony?) I thought of and used a little trick that might come in handy for applying the glue...
I took a small piece of paper and verified that I could slide it through the nick, under the little flap created by the nick.
That worked well so I put the tiniest amount of glue on the corner of the paper then, starting just a bit away along the edge of the paper, slide it under the flap until the glued part went through the nick. This applied the glue under the flap quite neatly. I gave it a good wipe with (clean, glue free) fingers to press the flap down and be sure the glue was well distributed and any excess was wiped away. I held it down with a weight until dry.
The nick at first showed as a small dark line but that vanished after drying. I used a "craft" glue that was advertised as working well with leather and drying perfectly clear.
Good luck!Last edited by TexasBob; 12-28-2009 at 10:27 PM.
-
The Following User Says Thank You to TexasBob For This Useful Post:
metalfab (01-03-2010)
-
12-28-2009, 10:25 PM #6
Thanks all. Wish me luck. I'll let you know how it goes.
-
12-28-2009, 11:12 PM #7
The instructions that came with my Filly strop suggested rubbing a dry pumice stone over the nicked area lightly. I'll admit, I've used this technique quite a few times. Just rub the stone over it lightly and evenly across the strop. Soon enough small nicks will go away. This also worked for water spots.
I will say - I used this on the Filly and I'm not sure if it'll work the same on smooth or finished leather. It'd be wise to spot test a part not normally used during stropping - like the corner near the hardware - before going crazy on the meat of the strop.
-
01-03-2010, 07:01 PM #8
I had thought about this. It's nice to know someone else tried this and it worked, I'll give it a shot. Thanks Texas Bob- I'm glad I joined this site more and more every day