Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    Hones/Honing/Master Barber avatar1999's Avatar
    Join Date
    Aug 2009
    Location
    Waynesboro, PA
    Posts
    997
    Thanked: 199
    Blog Entries
    6

    Default DIY strop leather

    I'm heading up to Harrisburg, PA and while I'm up there I plan on stopping by Tandy Leather and taking a look to see if they have anything good to make a couple strops from.

    I've sifted through some of the information here, and here's what I have found, but would love any more feedback you all care to offer

    As far as the kinda of leather that would make a decent strop, you are probably safe with:

    a) top grain cowhide

    b) nubuck

    c) latigo

    d) horsehide or shell

    e) buffalo

    f) shoulder leather

    Also, AFAIK, if the leather is flat and relatively free of high/low marks, it should strop well.

    As far as the "weight" of the leather goes, anywhere from 6 to 10 oz. is what to look for.

    I love to DIY when it's possible, and going to be cost efficient. I love doing things with my own hands, making things in a way that not everyone else could do. It gives me a little something to make me feel good about myself.

    Also, what length for a strop (just the stropping area, not the handle, etc) is typical/preferred. I know some people prefer different widths, but I would love to know about length.

    Thanks for any/all replies

  2. The Following 2 Users Say Thank You to avatar1999 For This Useful Post:

    raptorv562 (04-19-2010), Stubear (04-19-2010)

  3. #2
    < Banned User >
    Join Date
    Oct 2009
    Location
    Medina, Ohio
    Posts
    1,286
    Thanked: 530

    Default

    Don't forget Bridle Leather. It's excellent for strops

  4. The Following 2 Users Say Thank You to ShavedZombie For This Useful Post:

    avatar1999 (01-12-2010), raptorv562 (04-19-2010)

  5. #3
    < Banned User >
    Join Date
    Oct 2009
    Location
    Medina, Ohio
    Posts
    1,286
    Thanked: 530

    Default

    Also, I like an 18-22 inch stropping surface... that's just comfortable for my arm/draw distance (I'm 5'8'')

  6. The Following 2 Users Say Thank You to ShavedZombie For This Useful Post:

    avatar1999 (01-12-2010), raptorv562 (04-19-2010)

  7. #4
    Hones/Honing/Master Barber avatar1999's Avatar
    Join Date
    Aug 2009
    Location
    Waynesboro, PA
    Posts
    997
    Thanked: 199
    Blog Entries
    6

    Default

    Quote Originally Posted by ShavedZombie View Post
    Don't forget Bridle Leather. It's excellent for strops
    I think I remember seeing people using bridle leather, but I'm just trying to avoid something with holes in it already.

    I will take a look and see what they have when I go up, just to cover my bases. Thanks Zombie

  8. The Following User Says Thank You to avatar1999 For This Useful Post:

    raptorv562 (04-19-2010)

  9. #5
    < Banned User >
    Join Date
    Oct 2009
    Location
    Medina, Ohio
    Posts
    1,286
    Thanked: 530

    Default

    Bridle is the new SRD strop. It's my go to leather (and Lynn's) It gets excellent results

  10. The Following User Says Thank You to ShavedZombie For This Useful Post:

    raptorv562 (04-19-2010)

  11. #6
    Senior Member Tony Miller's Avatar
    Join Date
    May 2005
    Location
    Nottingham, Maryland
    Posts
    2,559
    Thanked: 382

    Default

    Tandy will likely have already cut strips 2" and 3" wide from latigo and top grain cowhide. These should be in the 6 to 10oz. range. Be sure they don't have fat wrinkles across them and watch for cupping side to side. The latigo is probably fine, the cowhide may well be cupped....just the nature of the leather and how it absorbs humidity.

    The rest of Tandy's leather will be sides or shoulders and you would need to cut your own strips. A side will run well over $100 but may make somewhere between 0 and 15 strops depending on quality

    For hardware they will have Chicago screws in 10 packs up to 100 packs or rivets. Go with the screws. Get a few 2" dee rings, one for the top, one for the bottom. A 5/8" or 3/4" trigger snap, snapped into the top dee will leave a ring to go over a hook in your wall to hang it by.

    Add some labor, a bit of skill, a little bit of luck, a great design, a following, a logo, a website, a......well, you never know what will happen !

    Have fun!

    Tony
    The Heirloom Razor Strop Company / The Well Shaved Gentleman

    https://heirloomrazorstrop.com/

  12. The Following 2 Users Say Thank You to Tony Miller For This Useful Post:

    avatar1999 (01-13-2010), raptorv562 (04-19-2010)

  13. #7
    Senior Member rickboone's Avatar
    Join Date
    Sep 2009
    Posts
    913
    Thanked: 83

    Default

    Anyway to get or does it exist already photos of what not to get in a piece of leather? I have no clue what some of the things are that were cautioned to look for. Thus, not sure what a quality piece of leather will look like

  14. The Following User Says Thank You to rickboone For This Useful Post:

    raptorv562 (04-19-2010)

  15. #8
    Hones/Honing/Master Barber avatar1999's Avatar
    Join Date
    Aug 2009
    Location
    Waynesboro, PA
    Posts
    997
    Thanked: 199
    Blog Entries
    6

    Default

    @Tony: Thanks! Not looking to start a business, just would like to have a strop or 2 for my own personal use without having to put a WHOLE lot of money into it. Times are very rough, and I am confident in my ability that I can make something worthwhile

    Quote Originally Posted by rickboone View Post
    Anyway to get or does it exist already photos of what not to get in a piece of leather? I have no clue what some of the things are that were cautioned to look for. Thus, not sure what a quality piece of leather will look like
    I don't have any pictures right now, but when I stop up there tomorrow, I will take some pictures with my camera phone if I can find some with the things to avoid.

  16. The Following User Says Thank You to avatar1999 For This Useful Post:

    raptorv562 (04-19-2010)

  17. #9
    is Over 9000!!!!
    Join Date
    Aug 2009
    Posts
    679
    Thanked: 326

    Arrow

    Rob, I'm no expert but you don't want to get anything from the belly or shoulders. Be mindful of unnatural folds, you can test this by folding it it. If it's got the natural U-shape and does not crease in such a way then it's good.

    Quote Originally Posted by rickboone View Post
    Anyway to get or does it exist already photos of what not to get in a piece of leather? I have no clue what some of the things are that were cautioned to look for. Thus, not sure what a quality piece of leather will look like
    It's difficult finding good section to use because the 5-7oz, 7-9oz, at least in my experience yielded wrinkled, lacerated, cupped leather and so on. These were pre-priced and pre-cut leather. That's nature of beast when dealing with "natural" element. Only then was I able to fully appreciate the quality and craftsmanship that goes behind strops with likes of Kanayama and Tony.

    Just hope the manager in your location is more tolerant of having a pre-priced section cut out for you.

    Keep an eye out for bug bites or markings. It's hard to notice but it becomes more evident when water is present:


  18. The Following User Says Thank You to SiRed8 For This Useful Post:

    raptorv562 (04-19-2010)

  19. #10
    Senior Member Tony Miller's Avatar
    Join Date
    May 2005
    Location
    Nottingham, Maryland
    Posts
    2,559
    Thanked: 382

    Default

    The pre-cut strips will vary in quality because of how they are made. A complete side is run through a cutting machine that gang cuts a large numbr of strips at one time. The entire side is reduced to strips in minutes from end to end with no regard to what it looks like.

    Most good strop makers (or any leather workers for that matter) will decide where to cut each piece avoiding any scars, wrinkles, thin spots, distorted areas, etc.....the resulting strips should all then have a clean surface but it results in a lot of waste.

    The flaws are in most hides to some extent. The really bad ones should be rejected, the better ones get the good areas cut out and hopefully the waste can be used for other things. This, as well as labor are why the better strops cost what they do. I know on what I buy a few hides are completely worthless, the rest can yield from 50 to 70% first quality pieces, 10 to 20% "practice material" and the rest is waste I give or throw away. Anything from the shoulder forward is a gamble in most cases, anything in the bottom 1/3 of the side towards the belly is usually complete waste.

    That is where the pre-cut strips become so varied. If they decide to cut 60inch long strips the entire length of a hide is not needed. For the best strips the shoulder should be removed before running through the machine so the majority of the strip is from the rear section. In many cases the rear, good area is removed for other uses and the front side and shoulder becomes the 60" strip. On the 72" strips nearly the entire side is used, end to end, so they may be okay at one end and bad at the other. The closer to the back (top of the cow) they are cut the better they usually are. One exception are "bends", this is near the shoulder and can be really great heavy, strong leather, or can have too many fat wrinkles. Again, every piece is different.

    Hides are also sold in grades. In most cases Latigo, Bridle and Harness leather is sold as TR grade (tannery run) and will vary hide to hide. Garment and tooling leather can be had in better grades, with either nicer looking natural surfaces or corrected surfaces. These better hides are typically reserved for the more finished tanning processes than the more utility functions of the latigo/bridle/harness leathers where surface usually does not matter. For strops we like the characteristics of the utility tanning, but want the finish of the best tooling leathers in the higher grades. You can have any grade of hide tanned in any method but will pay more and have to deal with minimum orders.

    Hope this helps,
    Tony
    Last edited by Tony Miller; 01-13-2010 at 10:42 AM.
    The Heirloom Razor Strop Company / The Well Shaved Gentleman

    https://heirloomrazorstrop.com/

  20. The Following 2 Users Say Thank You to Tony Miller For This Useful Post:

    raptorv562 (04-19-2010), ShavedZombie (01-13-2010)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •