Page 1 of 2 12 LastLast
Results 1 to 10 of 13
Like Tree1Likes

Thread: Is my strop Junk? (possibly too dry?)

  1. #1
    Junior Member
    Join Date
    May 2012
    Posts
    15
    Thanked: 1

    Default Is my strop Junk? (possibly too dry?)

    Hi,

    I'm relativley new to straight edge shaving, and the other half bought me a new strop from a supposed reputable online dealer.
    When the strop arrived it was very very dry and very hard. I tried to strop using it but it just did not feel how I thought it should?

    I have since rubbed it down with dovo yellow paste (animal fat I believe), and it is a little better, but now it feels like it has a few hard uneven spots?

    Is this how a strop should be or is it scrap? (I would have thought the strop should feel like a leather belt, nice and supple & floppy???)

  2. #2
    Vitandi syslight's Avatar
    Join Date
    Jan 2007
    Location
    Scharie County, NY USA
    Posts
    2,761
    Thanked: 224

    Default

    the suppleness is really a part of the type of leather ... i have 2 latigo strops and a russian leather strop that are all very stiff even after treating with pure neetsfoot they sound and feel different form my horsehide, bridle, and cordovan strops which are all more supple and some almost "floppy". they all work well though.
    i would try working some more dressing into the hard areas but your strop was likely to be fine before you started.

    i'm sure strop specialist will be along with more ideas.

    enjoy,
    jim

  3. #3
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Who makes the strop you have? Will be able to tell you much more with that information.

  4. #4
    Junior Member
    Join Date
    May 2012
    Posts
    15
    Thanked: 1

    Default

    Thanks for your replies, much appreciated.

    I don't think it is any particular brand of strop, as I think the wife just bought a generic beginners strop from a SE shaving website although she told me it was not cheap a flea bay one, which is why I want to salvage it if possible.

    I will see how it gets on, and just practice my stropping with an old blunt edge to help break it in.

    Just not quite sure what to do with stropping my good edges for now?

  5. #5
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Well as has been said different strops act differently. If your strop is a Illinois strop then it seeming stiff would be normal. But the flip side of that if it is a strop like a selective strop it will never be able to use it as a sr strop.

    Does the strop have any logos on it such as a bull or a star?

  6. #6
    Pasted Man Castel33's Avatar
    Join Date
    Jul 2010
    Posts
    1,283
    Thanked: 269

    Default

    Oh and forgot you can strop a sharp blade on newspaper to keep the edge crisp. If you look in the wiki I think there is a thread about it.

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    15
    Thanked: 1

    Default

    Not that I can recall.

    Will try rubbing in some neatsfoot as well and see how that goes, if I get no joy then I'll have to bite the bullet and get a replacement.

  8. #8
    Senior Member mjsorkin's Avatar
    Join Date
    Nov 2006
    Location
    New Jersey
    Posts
    1,139
    Thanked: 173

    Default

    If it wasn't cupped, wrinkled, bent then maybe it's okay for use.

    Michael
    “there is the danger that the ignorant man may easily underdose himself and by exposing his microbes to nonlethal quantities of the drug make them resistant.”---Fleming

  9. #9
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,769
    Thanked: 5017
    Blog Entries
    4

    Default

    Strops do vary alot but the one thing the quality ones have in common is they are smooth and uniform and do not feel like cardboard.

  10. #10
    This is not my actual head. HNSB's Avatar
    Join Date
    Nov 2009
    Location
    Middle of nowhere, Minnesota
    Posts
    4,623
    Thanked: 1371
    Blog Entries
    2

    Default

    As a last resort, before you give up on it, give it a fair coating of neatsfoot oil and work the leather over the towel bar in your bathroom. Basically make a turn around the bar and hold the sides parallel, then work it back and forth - that should eliminate the hard spots.

    Depending on the leather, you will get wrinkles from doing this - you can sand them out or burnish with glass. I used to use glass bottles but have found that I like the edge of tempered glass even better for burnishing.

    You will lose some of the thickness of the leather from doing all of this, but it will end up supple.
    ptkambo likes this.

    Strange women lying in ponds distributing swords is no basis for a system of government.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •