Results 1 to 10 of 17
24LikesThread: Another try at a pinning video
LinkBack URL
About LinkBacks-
05-18-2013, 09:54 PM #1Senior Member
- Join Date
- Dec 2006
- Location
- Burkburnett TX
- Posts
- 3,095
Thanked: 2392
Another try at a pinning video
I know there are some very good pinning videos out there, but I decided to try making another one. Hopefully I will do something a little different that somebody finds helpful.
Charlie
Pinning & Peening A Straight Razor II - YouTube
Reply With QuoteThe Following 12 Users Say Thank You to spazola For This Useful Post:
05-18-2013, 10:12 PM
#2
- Join Date
- Jan 2011
- Location
- Roseville,Kali
- Posts
- 10,432
Thanked: 2027
Great Vid from a master razor maker.I have helped a couple newbs tighten blades at the pivot and shown them how to pin.
One thing of great import I feel (you can see and hear it In Charlies vid) You want the hammer to bounce off the pin,the hammer will do this with a light touch and using gravity alone,no downward force is needed,just let the hammer fall under it's own wgt.
spazola likes this.
The Following User Says Thank You to pixelfixed For This Useful Post:
spazola (05-19-2013)
05-18-2013, 10:20 PM
#3
- Join Date
- Aug 2006
- Location
- Maleny, Australia
- Posts
- 7,977
- Blog Entries
- 3
Thanked: 1587
Nice work Charlie!
You know, I made a pining video once. The feedback was that it was quite boring: 10 minutes of me staring off into the distance and sighing a lot. I thought it had a lot of appeal with the goths and emos, but apparently not....... *sigh*
James.
<This signature intentionally left blank>
05-18-2013, 10:22 PM
#4
- Join Date
- Aug 2011
- Location
- Upstate New York
- Posts
- 5,780
- Blog Entries
- 1
Thanked: 4249
Thanks Charlie great video, i like the part about using the rod as a gauge. Good tip!
05-18-2013, 10:35 PM
#5
- Join Date
- Aug 2012
- Location
- Edmonton, Alberta
- Posts
- 782
Thanked: 118
Thanks for the video, using the stock as a guide and having a hole in the anvil for the first side were little things I hadn't though of. Gonna go try it out!
spazola likes this.
05-18-2013, 11:58 PM
#6
- Join Date
- Mar 2012
- Location
- Baden, Ontario
- Posts
- 5,475
Thanked: 2284
lovely looking razor to boot. Great vid with some key tips!
spazola likes this.
Burls, Girls, and all things that Swirl....
05-19-2013, 01:44 AM
#7
- Join Date
- May 2008
- Location
- Bodalla, NSW
- Posts
- 15,597
Thanked: 3748
Pining for the fjords ?Originally Posted by Jimbo
Nice vid Charlie. Like your anvil. 3" steel bar ?
spazola likes this.
“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”
05-19-2013, 01:55 AM
#8
- Join Date
- Dec 2006
- Location
- Burkburnett TX
- Posts
- 3,095
Thanked: 2392
Close it is a 2.25 round of 4140.
Jimbo, sometimes I pine, sometimes opine.
Charlie
The Following User Says Thank You to spazola For This Useful Post:
onimaru55 (05-19-2013)
05-19-2013, 02:12 AM
#9
- Join Date
- Apr 2012
- Location
- Jersey City
- Posts
- 225
Thanked: 50
Terrific video as all of yours are.
Two questions.
I did some nickel silver pins a while back and ended up using a 16 oz. ball peen hammer rather than the 4 oz. on them because they were so darn hard. This lead to a discussion about annealing. Were those pins annealed? It went a lot faster than any peening I've done.
The other question is did that cut on your finger come from a razor? I just nicked myself good lately when I was honing up a blade and the phone rang. Distracted me for just an instant and there was blood.
Keep up the good work.
Every gun that is made, every warship launched, every rocket fired, signifies in the final sense a theft from those who hunger and are not fed those who are cold and are not clothed. Dwight Eisenhower
05-19-2013, 02:23 AM
#10
- Join Date
- Dec 2006
- Location
- Burkburnett TX
- Posts
- 3,095
Thanked: 2392
The nickel silver pins were not annealed my me. I used the pin stock as I got it. The pin stock came from Jantz knife supply.
The cut on my finger is the remnants of a blister that has gone awry it just looks like a cut. I get blisters on my fingers when I grind razors. I do get a number of little cuts in the shop super glue is my friend.
Charlie
