Results 1 to 6 of 6
8Likes
Thread: First Attempt at Custom Scales
LinkBack URL
About LinkBacks-
02-14-2014, 12:37 AM #1Member
- Join Date
- Oct 2013
- Posts
- 73
Thanked: 7
First Attempt at Custom Scales
Coping saw, sandpaper, Dremel drill press unit. Never made anything before. Learned a lot!
Looking for a spindle sander, that should save a lot of time. I just traced around some old scales and used that to shape these. Next time I'll try to be a little more creative. I used an acrylic polyurethane to finish, and I'm not thrilled. Thinking about tung oil for next time.I have found that if you love life, life will love you back. Arthur Rubinstein
-
02-14-2014, 12:42 AM #2Shave This
- Join Date
- Jan 2014
- Location
- Pickering, Ontario
- Posts
- 1,036
Thanked: 183
I'm with you on the tung oil, I think a basic belt/wheel grinder might be more versatile than a spindle sander.
Straight Razor Restoration: Start to Finish (Part 8) - YouTube
You should watch the whole series, it really is great.Last edited by Hart; 02-14-2014 at 12:47 AM.
Reply With QuoteThe Following User Says Thank You to Hart For This Useful Post:
moostashio (02-14-2014)
02-14-2014, 12:54 AM
#3
- Join Date
- Jun 2013
- Location
- Pompano Beach, FL
- Posts
- 4,042
Thanked: 635
Not bad for a first try. Use your dremmel with a sanding wheel to shape them. If you have a router attachment for your dremmel it helps also.
Geezer likes this.
The Following User Says Thank You to bouschie For This Useful Post:
moostashio (02-14-2014)
02-14-2014, 04:18 PM
#4
- Join Date
- Mar 2011
- Location
- Corcoran, Minnesota
- Posts
- 665
Thanked: 170
Ditto what Hart said about a disc/belt sander. A small cheap one can be had at Harbor Freight for less than $40.
Geezer likes this.
The Following User Says Thank You to skipnord For This Useful Post:
Geezer (02-14-2014)
02-15-2014, 05:51 PM
#5
- Join Date
- Oct 2013
- Posts
- 73
Thanked: 7
Went to Harbor Freight yesterday and sprang for the 4x36" belt, 6" disc sander. Just used it this morning, and it saves a lot of time (duh)!
Meanwhile, I pinned up this old W&B in padauk. I love this wood! Any ideas on how to get a shine on the matte finish of the blade?
Also, has anyone put a buffing wheel on the 6" disc on their belt/disc sander?
I have found that if you love life, life will love you back. Arthur Rubinstein
02-15-2014, 08:40 PM
#6
- Join Date
- Jan 2014
- Location
- Pickering, Ontario
- Posts
- 1,036
Thanked: 183
Basic starting point would be to rub it with polishing paste such as Mother's, then decide if you want to get into a lot of sanding. Better done with the scales off. An imperfect finish is part of the character of a vintage blade and doesn't have to be made perfect. The initial polish may leave it just nice enough.
The Following User Says Thank You to Hart For This Useful Post:
moostashio (02-16-2014)
