Thread: Where should I begin?

Hello everyone!

This will be my first restore. However, I am not quite sure where to begin. I have read pretty much all of the posts and articles on how to restore a blade, but I don't know where to start. I have read all about grinding, buffing, hand sanding, polishing with steel wool. I just don't know what process I should being with on my razor. The razor I am working on is a JA Hellberg Faux-frameback Swedish steel razor. Let me know what you guys all think I should do!

As for tools, I have disc sanders, variable speed grinders, and ways that I could attach buffing wheels. And of course whatever I can purchase at Home Depot for a few dollars.


This is what I'm dealing with. Nothing awful at all. Just some discoloration and very minor pitting on the blade. Let me know what you think

Parker

PS: Not worried about scales at this point, just worried about the blade.

Hey Parker - out of curiosity, what kind of look are you going for? Bright & shiny or well used?

IMHO there's no reason to jump to power tools at all if you have the time to do it by hand. There's much less cost and - most importantly - much less potential for catastrophic disaster! All it takes is for the blade to catch on your wheel and it's game over for the blade.

My approach is to start high (in terms of grit - i.e. less abrasive first) as you can always remove more steel later, but it's awfully hard to put back on if you go to far or scratch it deeply. So I generally start with some metal polish and a rag just to clean it up and see where things stand. And then if needed move on to some wet/dry sandpaper, usually starting somewhere around 600. If that doesn't do the trick, I'll try 320, and so on. Then once whatever I wanted to get rid of has been gotten rid of, I work back up through the same progression in reverse: higher grit wet/dry, moving eventually back to the polish and cloth.

One thing that might help on those dark splotches is a pencil lead. Just scribble over the spot with a pencil. The graphite is a mild abrasive that can be handy in dealing with small areas.

Since I tend not to be looking for a mirror finish on mine, I tend not to worry about some stuff that other guys would want to get rid of. It's totally a judgement call.

Oh, and if you want to use a buffer, etc., then by all means go for it. The above is just what works for me, but others get amazing results from buffers.

EDIT - forgot to say - ENJOY IT!

Looking for more of a worn look, but without the imperfections there are, you know? Just like a satin finish rather than a "razor-mirror." Thanks for the advice! Much appreciated.

Looks likely! The workshop would be a fine spot to begin! Looking forward to seeing it done!

Just realized this was totally in the wrong place
Mods can change it if you want lol!

Either way, Get to work! It has to get done now!