Thread: Getting the rust in the jimps?!?!

Depending on how deep it goes or how fine the jimps are. I fine getting right down into the depths of the real fine jumps more challenging. I use a small wire brush to start most often, it it is needed I graduate to a wire wheel on a dremel, and if need be I follow with 4or600 grit wet dry glued to a piece of wood, making something that looks a lot like an emery board for doing nails. I have to say it is very hard for me to get them pristine. I have better success with the scales off, but not everything gets that much effort, there are some that get to the line of that is as much work as I am willing to put into this razor.