Results 1 to 10 of 14
Hybrid View
-
12-23-2014, 01:02 AM #1
Secret to cleaning ridges on tang?
So, title pretty much says it. Bonus pic of my latest project, 13/16 electric company and the rust in the ridges of the tang.
-
12-23-2014, 01:18 AM #2
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,984
- Blog Entries
- 1
Thanked: 13234A Brass and/or a SS gun cleaning brush works for me
These
Last edited by gssixgun; 12-23-2014 at 01:20 AM.
-
The Following 3 Users Say Thank You to gssixgun For This Useful Post:
57vert (12-23-2014), DoughBoy68 (12-23-2014), sharptonn (12-23-2014)
-
12-23-2014, 01:28 AM #3
Yep. Keep the dremel wire brush off the area near the blade! (don't ask me how I know!) and use a combination of those brass brushes and a toothbrush with polish, even Comet. By hand is best. The dremel wire brush wears the jimps down.
Brass is best!
Oh! That is a VERY nice blade there! Bone?Last edited by sharptonn; 12-23-2014 at 01:32 AM.
"Don't be stubborn. You are missing out."
I rest my case.
-
The Following User Says Thank You to sharptonn For This Useful Post:
57vert (12-23-2014)
-
12-23-2014, 02:21 AM #4
No the blade is steel, not bone. Haha... ok.... I'm not sure of the material of the scales. Here's hopefully a better picture of the scales. No washers are used with the pin, and also the wedge end is not pinned but glued? The wedge end does have a wedge and is not solid. Would this indicate that the scales are a faux bone or ivory? I think they are to thick to be ivory.
From my research the tang has new york stamped on it which would put the blade I believe pre 1890. Would this be a rescale?
-
12-23-2014, 02:30 AM #5
Looking at it now, I think yellow celluloid/faux ivory. Electric did lots of different things with scales. I think original.
I think unpinning will have to be done to do a proper job on the tang. Either that, or lots of tedious work.
Nice blade. Electrics are very good and 6/8+ is sorta rare, I think."Don't be stubborn. You are missing out."
I rest my case.
-
The Following User Says Thank You to sharptonn For This Useful Post:
57vert (12-23-2014)
-
12-23-2014, 02:37 AM #6
I think celluloid too, there are no pores as on my other razors with bone scales.
To clean it up properly it will need to be unpinned. I'm pretty new to the restoration game. I'm currently working on my blade polishing and honing skills. So for now I will do what I can with the blade keeping it pinned. I've got a few razors with cracked scales I am going to practice unpinning and pinning with before I try on a razor I want to save the scales on!
Thanks for your help guys, this is such a great community!