Results 1 to 10 of 13
Thread: Project Fun
Threaded View
-
05-21-2016, 08:00 AM #7
- Join Date
- Dec 2011
- Location
- I'm Gonna Spend Another Fall In Philadelphia
- Posts
- 2,029
Thanked: 498Hello Zimbyzim
I once fabricated a razor from hand file (without annealing , and re-heatreated) but leaving steel hard throughout the process. And I have to say it was ridiculously hard, being that a hand file steel is extremely hard and difficult to work without putting any heat to it to change its temper. I was lucky to have a machine shop at my disposal that had coolant spray and even that was tough to keep cool.
Here are a few links of the project.
http://straightrazorpalace.com/works...bilizer-2.html
http://straightrazorpalace.com/custo...ile-razor.html
Another thing about doing this without annealing and reheattreating is that being that the steel of a file is extremely hard with a Rockwell hardness well into the 62+ range. The edge of my razor was really brittle and that making and keeping an edge was a real nightmare.
Once again keep the sucker cool throughout your grinding. If you see discoloration, you altered the temper.
Good luck
-
The Following User Says Thank You to Tarkus For This Useful Post:
Substance (05-21-2016)