Results 1 to 10 of 15
-
03-27-2017, 01:34 PM #1
- Join Date
- Mar 2017
- Location
- Colorado, USA
- Posts
- 10
Thanked: 0Scale Replacement, Historical Accuracy, and Value
Hi,
Sorry if this has already been asked. Poked through the forum a bit and didn't see it...
I have inherited my great grandfather's pre-1890 Wade & Butcher with (I think) horn scales. It needs quite a bit of blade-work, and once it's polished, the blade won't look great on the scales. The handle isn't in TERRIBLE shape, but I'd like to replace it.
My question is this: will replacing the scales negatively impact the value of the razor? Not that I'm planning to sell it, but I don't want to destroy something that's worth more in its original condition. Also, what should I know as far as keeping everything historically accurate?
Thanks,
Blackthorn
-
03-27-2017, 02:06 PM #2
- Join Date
- Feb 2013
- Location
- Haida Gwaii, British Columbia, Canada
- Posts
- 14,443
Thanked: 4828Most of the commercial value in razors is in the working aspect of the razor. So an old razor with poor surface condition and barely functioning scales is not as salable of an item as one that has beautiful metal condition and nice functioning scales. I have tried and tried to make horn scales look like old horn scales. There is a certain look that I have not been able to repeat. I think that an old blade in fantastic metal condition with a true and natural patina and aged and full functioning scales is the pinnacle of value. Bear in mind that is what I value and not the open market.
This is a good example of a razor with nice aged scales and beautiful patina that has been loved and cared for for a very long time. It is not rusty nor pitted nor covered in black rust, it is actual real patina. Black rust is not patina.
This is a razor that I tried to make look old. When I received it, it was in bad shape and needed some serious sanding and deep cleaning, it was full of rust both active red rust and black rust. I worked pretty hard to make the steel look like someone had loved and cared for it for a long long time. The scales are a swing and a miss as far as I am concerned, they are not the right shape exactly and the ages look did not work out at all.
So the steel can be made to look old, scales I am sure can too, I just have not figured out how with horn. Bone is a different story, but you have horn scales.It's not what you know, it's who you take fishing!
-
03-27-2017, 02:06 PM #3
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,311
Thanked: 3228Welcome to the forum
Usually the main value of most vintage razors that have a family connection is as an heirloom. Unless it is NOS and/or an extremely rare example, it has a relatively modest monetary value. In that case modifying it would have a negative impact on it's monetary value. It depends on what you have there.
Just as there are ways to clean up a blade there are also ways to rehab the scales. You may be able to salvage the scales without resorting to making new ones.
Some clear photos of the razor would go a long way to giving you some proper advice.
Bob
I se Rez beat me to it. Must type faster.Life is a terminal illness in the end
-
03-27-2017, 02:10 PM #4
Can you share some pics? If the scales are not damaged too bad they can be repaired possibly and you xan still have the original scales and washers and such. As stated value is subjective really depends on the market and whom is looking for what.
If the scales can be salvaged then IMO that increases value as far as monetary and historical. I like to keep as much as I can when I can.Nothing is fool proof, to a sufficiently talented fool...
-
03-27-2017, 05:42 PM #5
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,037
- Blog Entries
- 1
Thanked: 13249Pics as said above mean way more then 1000 words hehehe
-
The Following User Says Thank You to gssixgun For This Useful Post:
Gasman (03-28-2017)
-
03-28-2017, 06:57 AM #6
- Join Date
- Mar 2017
- Location
- Colorado, USA
- Posts
- 10
Thanked: 0
-
03-28-2017, 07:44 AM #7
If it were my heirloom I'd use some Mothers Mag & Aluminum Polish, Flitz, etc. to clean it up a bit, get a pro to hone it (check out Member Services here on SRP) and shave with it, should be a fine shaver once the chips are out of the edge. The scales look good to me, I'd leave them alone except for treating them with some neats foot oil to condition them, but that's just me, I really like original.
"If You Knew Half of What I Forgot You Would Be An Idiot" - by DoughBoy68
-
03-28-2017, 12:00 PM #8
- Join Date
- Mar 2017
- Location
- Colorado, USA
- Posts
- 10
Thanked: 0I'm definitely keeping it as a daily shaver. I'll see how the scales clean up with some fine sandpaper and some oil. I DO have some ideas for new scales though that I'm dancing with... don't know what a razor like this is worth so I don't know if it'd be worth putting mammoth or walrus scales on, but I like toying with the idea. I really want to learn to restore the edge of a razor like mine, so I'll probably buy some cheap ones from local antique shops to practice on before fixing this one but I want to do the work myself.
-
03-28-2017, 01:11 PM #9
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,037
- Blog Entries
- 1
Thanked: 13249
I am Soooooooo saving your pics to my files,,,
Factory Hollow Ground Blade, which was ground after 1891 note the stamp,,, it has no "England" on there
I have tried many time to explain that the Country stamps are only a guide to dating a razor not an absolute..
On Topic:
that looks to be in darn good shape, I agree soak in in Neatsfoot Oil a couple of days BEFORE doing anything else to recondition the Horn scales, then go slow ...Last edited by gssixgun; 03-28-2017 at 03:01 PM.
-
The Following User Says Thank You to gssixgun For This Useful Post:
ejmolitor37 (03-28-2017)
-
03-28-2017, 01:27 PM #10
- Join Date
- Mar 2012
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 17,311
Thanked: 3228After seeing your pics of the razor I think it is in very good condition all things considered. I definitely think it can be restored and kept original while doing so. As it is a family heirloom I do not think it is a good idea to attempt a restoration on your own. I would suggest that you have it restored by a competent/reputable restorer. There are just too many ways to mess up if you have no experience doing that sort of thing. OTH it is your razor to do with it as you please.
BobLife is a terminal illness in the end