Results 1 to 9 of 9
Thread: Europe buy micro bolts and nuts?
-
11-12-2017, 10:30 AM #1
- Join Date
- Sep 2017
- Location
- Sundsvall, Sweden
- Posts
- 93
Thanked: 8Europe buy micro bolts and nuts?
Hi.
I know there are a few guys living in Europe that are restoring straight razors. I wanna try to make my own scales and also pinning these and also repinning older scales. With that being said I think It would be a great option to buy some micro bolts and nuts.
But I have no idea where to buy them, I also don't know what I should be looking for. Soo If there is anyone in here that has ordered from Europe, and can link me to a product that would be awesome.
Thanks in advance.
-
11-12-2017, 11:08 AM #2
I think you'd be better served with original spare parts, see here: Spare parts
-
11-12-2017, 11:26 AM #3
There's a German seller on eBay called razor-handles that I've bought pins from and I gotta say, those are quality pieces. Sends from Germany, good pricing too and great pins.
(Was a very generous seller and came with extras and of course also a good amount washers; would buy again without a doubt)
I also used the Revisor ones, they work as well.
Can't go wrong either way.
No idea on bolts or nuts though.
-
11-12-2017, 12:12 PM #4
- Join Date
- Sep 2017
- Location
- Sundsvall, Sweden
- Posts
- 93
Thanked: 8Thanks, guys.
I got pins and washers. It's the micro bolts and nuts I'm searching for atm. Something like this.
-
11-12-2017, 12:22 PM #5
-
11-12-2017, 12:26 PM #6
- Join Date
- Sep 2017
- Location
- Sundsvall, Sweden
- Posts
- 93
Thanked: 8Will do sir. And also thanks for the eBay seller, might try those Pins next time.
-
11-12-2017, 02:18 PM #7
You can buy the bolt and the nuts on ebay and Amazon, M1.6 is the sizeing you want, just with the bolts you need to choose what length you want. 16mm is really the longest you would need or want and the shortest maybe 12mm (not sure on shortest as I use 16mm) 16mm is a tad long but Im ok with it
-
-
11-12-2017, 04:28 PM #8
- Join Date
- Sep 2017
- Location
- Sundsvall, Sweden
- Posts
- 93
Thanked: 8
-
11-12-2017, 09:23 PM #9
That was my iszue in trying to help this fine gentleman out. I know in the states here we use #0. But had no clue in other countries.
It's just Sharpening, right?
Jerry...