Results 1 to 10 of 16
Thread: My belt sander got a workout...
LinkBack URL
About LinkBacks-
10-09-2007, 10:29 PM #1Razorsmith
- Join Date
- Aug 2006
- Location
- Western Pennsylvania, USA
- Posts
- 2,659
Thanked: 320
My belt sander got a workout...
This razor is a 5/8 Wade & Butcher that I sanded to a 400-grit satin finish and then treated with liquid gun bluing.
The scales are bubinga wood finished with Tung Oil. The pins and spacer are brass.
It came out pretty well for my first power sanding job. I don't have my high-grit belts yet, so I had to finish the sanding by hand.
The bluing is a little uneven for some reason, even though I immersed the blade in the liquid.
And the blade is slightly off center; not sure whether I could have changed that or not. The tang seemed slightly off center before I pinned the razor... 
The belt sander makes this whole process much simpler. I find I can more accurately shape the scales because the sander removes material evenly and at a predictable rate. Fun!
Josh
-
10-09-2007, 10:51 PM #2Senior Member
- Join Date
- Jun 2007
- Location
- North Carolina, USA
- Posts
- 558
Thanked: 6
Nice work, Josh! That bubinga really has a nice grain. How do you like the tung oil as opposed to the CA? I really don't think the belt sander is going to help that much at the higher grits. Those go pretty smoothly by hand and don't take that long. What it's really good at is removing material.
-
10-09-2007, 11:12 PM #3Razorsmith
- Join Date
- Aug 2006
- Location
- Western Pennsylvania, USA
- Posts
- 2,659
Thanked: 320
Jim,
By higher grits, I actually just mean over 120 grit. Bill Ellis uses 400 and above for rounding and smoothing the edges. The 120-grit belt can get away from me sometimes.
Josh
-
10-09-2007, 11:45 PM #4Loudmouth
- Join Date
- Jun 2005
- Location
- Etobicoke, ON
- Posts
- 7,171
Thanked: 64
Nice work Josh
-
10-10-2007, 12:35 AM #5Razorsmith
- Join Date
- Aug 2006
- Location
- Western Pennsylvania, USA
- Posts
- 2,659
Thanked: 320
I'm kinda curious to see how the blued blade is received. It's different looking, and I'm not sure I like it quite as much as I thought I might.
Josh
-
10-10-2007, 01:12 AM #6;>}
- Join Date
- Aug 2007
- Posts
- 57
Thanked: 2
Nicely done! I like the blue, as something a little different.
-
10-10-2007, 01:36 AM #7Senior Member
- Join Date
- Nov 2006
- Posts
- 910
Thanked: 31
Nice work Josh!! Looks sweet
-
10-10-2007, 02:03 AM #8Senior Member
- Join Date
- Dec 2006
- Location
- Burkburnett TX
- Posts
- 3,100
Thanked: 2392
Beatiful grain and shaping, nice scales. The blade looks cool.
Would you elaborate on the bluing process? I think that I want to try it.
Charlie
-
10-10-2007, 02:13 AM #9Razorsmith
- Join Date
- Aug 2006
- Location
- Western Pennsylvania, USA
- Posts
- 2,659
Thanked: 320
Charlie,
I bought some liquid gun bluing at a sporting goods store. You clean the steel with steel wool, then apply the bluing with a q-tip or small paint brush. Since this blade was unpinned, I actually just dunked it in the bottle for a minute.
You rinse it off, then polish it with steel wool. Repeat a few times to get the finish as even as possible.
That's all there is to it.
Josh
-
10-10-2007, 02:17 AM #10Libertarian Freak
- Join Date
- May 2007
- Location
- Dallas - Ft. Worth, Texas
- Posts
- 763
Thanked: 9
Josh,
Gotta say I really like the blued steel with the color of the wood (I even like the color of the pins on the wood with the steel). Nice job. The grain is so rich in the bubinga. Very cool.
Reply With Quote