Results 1 to 9 of 9
Thread: More razors, same question
-
02-01-2008, 09:21 PM #1
More razors, same question
Ok, I hit up the antique store in the next town over, and found several more razors at 8$ or less (they were having a sale, everything 20% off). So I ended up buying 4 more, after reading the approximate amount of work my first find would take. Hopefully a few of these will be less work, as they have significantly less rust. I'm particularly interested about the 1820 crown and sword. There's also two Ward & Butchers, and a Sheafworks.
Again, any idea which I should save to practice honing on (and which I should damage/practice on first), or mark down for more serious restoration in a few months once I have more time and access to some serious woodworking tools. Likewise, if there's something here that I shouldn't touch at all, and reserve for more talented hands to handle, let me know and we can work something out. Also, if more info, a serious description, or better photos are required, let me know.
-
02-01-2008, 10:00 PM #2
my opinoin.
you got a great gruop there to learn with.
1 - the yellow crown/sword is going to be a good project razor for a full restoration. you're going to have to go down to 400 probably even the 220 grit sandpaper to get all that rust/pitting out. but thats good practice. will teach you to sand evenly so you don't make dents then go all the way up thru 400/600/800/1k/1500/2k then on to maas. will make it a nice razor. great practice here
2 - the shefdworks one at the bottom. thats another good one to practice restoring. start with just maas and see what it does. observe what kind of gunk/black it removes and what it doesn't. learn from that when buying blades.
3- both the crown/sword and the shefworks blades will be great learning honers. crown/swords take great edges and the shefdworks one looks that it would also. so get practicing!
i would spend my learning on those 2 blades becuase they will allow you to learn all types of restoring and honing.
the 2 WnB. the first one looks in great shape, should be able to restore that nicely. the 2nd one is harder to tell. still good shape but sometimes they are more used and thus honewear/uneven blades due to sharpning/usage. harder to tell on that one from the photo.
great pick-up for 8$ each.
~J
-
02-02-2008, 12:15 AM #3
-
02-02-2008, 12:27 AM #4
- Join Date
- Jan 2008
- Posts
- 3,446
Thanked: 416Maas is a metal polish found at some walmarts and at walgreens.
-
02-02-2008, 08:43 AM #5
Maas can also be found in a true value or ace hardware stores, but like the walgreen's and walmarts it is not available in all of them...
and of course on-lineBe just and fear not.
-
02-02-2008, 02:57 PM #6
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,027
- Blog Entries
- 1
Thanked: 13245This Crown and Sword 1820 ERN is a full restore, looked almost like yours to begin with, the scales weren't as nice as yours though so I tossed them into the parts bins.... Don't under-judge this razor, when they are up and running they will shave with the best out there, mine is definitely in the top of the rotation and it has some serious stablemates.... The good news is the they clean up fairly easy. I cant speak for how hard it was to hone, mine had no hone wear so it was very very easy to set the bevel and sharpen
-
02-02-2008, 03:11 PM #7
The Crown and the two Wade's will make for excellent shavers. You've been getting some mighty fine blades lately!
-
02-02-2008, 04:24 PM #8
Personally I think that Sheafworks razor might be the nicest of the lot...
GREAVES, WILLIAM
Shefflield
1780-1816 ("Old Sheffield Razors" by Lummus. Antiques, December 1922 p.261-267)
WILLIAM GREAVES
Sheaf Works, Sheffield
ca. 1820 - 1858
WILLIAM GREAVES AND SONS
Sheffield
Built the Sheaf Works (first large factory in Sheffield) in 1823-6
1816 - 1850 ("Old Sheffield Razors" by Lummus. Antiques, December 1922 p.261-267)
GREAVES, W & SONS
THOMAS TURTON & SONS LTD
Sheaf Works, Sheffield
ca. 1845 - at least 1919
Obviously, it looks like Sheafworks was the name of the "first large factory in Sheffield" and was built by William Greaves (who makes great razors). If you don't want that one, feel free to send it to me!
-
02-02-2008, 04:38 PM #9
I don't think I could have asked for more information! Thanks! Unfortunatly, now I'll be more aware of what I'm actually working on, and therefore more worried about messing it up >.<
If my attempts at restoring the other razor I'm working on (see
http://straightrazorpalace.com/showthread.php?t=16388
manage to convince me that I should probably wait till I know more about what I'm doing, I'll send it it your way. Thanks for the info!