Results 1 to 9 of 9
Thread: Rust in the stamp
-
01-19-2009, 02:42 PM #1
Rust in the stamp
I finally got a vintage hand-me-down -- my uncle's (by marriage) grandfather's straight. It's a Maleham and Yeoman's and was covered in rust and a little pittng. Managed to clean it up pretty well with wet & dry, and there's hardly any hone wear. However, the rust got into the stamp on the tang and I just can't get it out by hand. Any tips for getting the rust out without the use of a dremel?
Also, any further info (dates etc.) on Maleham and Yeoman's would be gratefully received. It looks like Ilija got a hold of one a couple of years ago, but very little info in general. I'm particularly interested in the scales material. Smells like leather, but looks like some sort of compressed material.
Cheers
M.
-
01-19-2009, 03:53 PM #2
I would suggest some 000 steel wool with a lubricant like thin oil of WD 40.
Be careful how you treat people on your way up, you may meet them again on your way back down.
-
The Following User Says Thank You to JimmyHAD For This Useful Post:
majurey (01-20-2009)
-
01-19-2009, 04:03 PM #3
Nice, especially with the history! Getting it out will be fiddly. How would boot polish over it do? It would seal it till you can come up with a better solution. I know it's not ideal long term.
What does compressed horn smell like? Maybe it is just compressed leather?
-
01-19-2009, 05:11 PM #4
Thanks guys. Have tried some steel wool but not very effective. I have brass brush somewhere so that might be worth a go.
ben -- it's definitely not horn. It's like some sort of material which has fibre in it, but it smells a little like leather. It's not hard -- you can see where the edge of the scales are flaking a little, but otherwise it's in absolute tiptop shape. Whatever it is, it lasts!
-
01-19-2009, 05:13 PM #5
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 27,033
- Blog Entries
- 1
Thanked: 13247Two ways that I use that work pretty well, the brass brush is my first method of attack and if that doesn't work I use a dental pick....
-
The Following User Says Thank You to gssixgun For This Useful Post:
majurey (01-20-2009)
-
01-19-2009, 05:23 PM #6
Here ius what I have! Hope this helps
-
The Following User Says Thank You to JMS For This Useful Post:
majurey (01-20-2009)
-
01-19-2009, 05:49 PM #7
I think the scales ARE leather. They look the same as the other leather scales I've seen. I don't particularly like them– they can start to look wrinkled a little, but they do exist.
-
01-20-2009, 09:43 AM #8
Mark, thanks. That's exactly it. Those markings are identical so perhaps we can date this at 1850? (Although I have to say I thought it was much more recent from its condition, was expecting 1900-1930 range.)
They certainly smell of leather, but they must have gone through some sort of treatment and hardening because they're not flexible and there's almost zero degradation. Probably a very cheap material with which to make scales in the day.
-
01-20-2009, 01:45 PM #9
- Join Date
- Apr 2008
- Location
- Essex, UK
- Posts
- 3,816
Thanked: 3164Hi Mark,
I think that the scales are leather which has undergone a process called "Cuir Bouilli" or something very similar. Basically, leaher is soaked, macerated, formed into sheets or moulds, then baked, waxed and hammered.
Regards,
Neil.
-
The Following User Says Thank You to Neil Miller For This Useful Post:
majurey (01-20-2009)