Thread: Does anyone have any extra micro fasteners?

Originally Posted by ChrisMeyer

I don't know if there's one in your area, but my local Sears Hardware store stocks 0-80 stainless screws, washers, and nuts. They sell them individually.

Ill have to check that out, thanks.

My local Ace hardware has stainless 0-80 1/2" slotted head screws with nuts and washers and a Sutherlands (NKC) has stainless 0-80 1/2" tiny philips head screws. They go for about 30 cents each.

Hey guys, does anyone know the (rough) size in mm of these 0-80 screws? My hardware store sells itty-bitty screws, washers and nuts, but I'm not sure just what size is best (for the inevitable coming of the rescaling bug).

Originally Posted by JimR

Hey guys, does anyone know the (rough) size in mm of these 0-80 screws? My hardware store sells itty-bitty screws, washers and nuts, but I'm not sure just what size is best (for the inevitable coming of the rescaling bug).

Jim,

took out my digital caliper.

The 0-80 screws head diameter = 2.30mm. The screws head height = 1.10mm

I always order the longer ones and they are close to 20mm long.

The nut size diameter = 2.40mm and the height = 1.25mm

Originally Posted by Maximilian

Jim,

took out my digital caliper.

The 0-80 screws head diameter = 2.30mm. The screws head height = 1.10mm

I always order the longer ones and they are close to 20mm long.

The nut size diameter = 2.40mm and the height = 1.25mm

Thanks Max!
Sorry to ask, but what about the shaft? Roughly 2mm, I'm guessing from the head size.

Originally Posted by JimR

Thanks Max!
Sorry to ask, but what about the shaft? Roughly 2mm, I'm guessing from the head size.

the width is 1.45mm