Thread: Edge on my Wedge

Ok so here is the issue, I picked up this wedge for a project and it was totally dull when I got it. I couldn't even scratch myself with it. So I worked it on a Coticule and a blue for several laps, but I just did'nt have the patience to try to set the bevel. I read the wiki on it, but honestly I had about 400 passes and wasn't making much headway. So I put it to a very coarse diamond that was about 400 grit. It definately shaves now after about 50 passes there and then probably 100 blue and then 250 coticule. I know I should have run a 1000 in between, but at the time I didn't have one. Here is the deal, the bevel is kind of wide i think and also it is'nt straight across on one side. it goes teh length of one side of the edge and on the other, it is high in the middle and low on the heel and toe. I feel like the blade mith be kind of warped, but the spine is straight. Here are some photos if anyone has any input or advice. Sorry for the bad photos, I don't know how you guys do it.