Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default Ouch! (sad pic inside)

    I got a razor off ebay a few weeks back.
    The first shave I had off it wasn't "that" great. It was okay, but it definitely needed a good honing session. So I spent the past few days giving it just that, careful and methodical honing and it was making the difference.

    I have a few patches on my arm where I was testing, and it was definitely approaching the level of sharpness I was expecting.

    I gave it a quick strop today, and I was just setting about giving it a polish before I was going to have another go at shaving with it. I was sat on my front step enjoying the weather, giving it a quick once over with a polishing thingy on the dremel. It was coming up beautifully, shining brightly in the sunshine when I slipped...and this happened:



    Colour me heartbroken.
    I've spent some time caring for this fella, and we'd gotten quite close.
    I'm thinking I'll gring out the fracture into a stupid curve as best as possible, but I don't think I have the skill for a full on regrind.

    It was/is a 7/8" a re-grind I'm guessing will make it a 5/8" at best.

    At this point, I'm in need of advice.
    Attached Images Attached Images  
    Last edited by url; 08-06-2009 at 12:36 AM.

  2. #2
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default

    I checked for fractures beyond the chip, there's no hairlines or anything. At least nothing visible to the naked eye.

    I'll be more than happy to post pics, if when I can get it back to health.

    I'm thinking that if I took a straight line back from the crest of the chip that would be the easiest. Alternatively, I'm thinking that losing the scales and taking a line back would give it that Japanese blade style.

    Like I say, I'm open to suggestions.

    Edit: I edited out the bad language in my original post. My apologies, I pasted my post from another forum.
    Last edited by url; 08-05-2009 at 05:41 PM.

  3. #3
    I shave with a spoon on a stick. Slartibartfast's Avatar
    Join Date
    Jan 2009
    Location
    Stay away stalker!
    Posts
    4,578
    Thanked: 1262
    Blog Entries
    1

    Default

    Sound like you were lucky to only damage the blade and not yourself.

    Were you hand holding the blade and using the dremel?

    Quote Originally Posted by url View Post
    I checked for fractures beyond the chip, there's no hairlines or anything. At least nothing visible to the naked eye.

    I'll be more than happy to post pics, if when I can get it back to health.

    I'm thinking that if I took a straight line back from the crest of the chip that would be the easiest. Alternatively, I'm thinking that losing the scales and taking a line back would give it that Japanese blade style.

    Like I say, I'm open to suggestions.

    Edit: I edited out the bad language in my original post. My apologies, I pasted my post from another forum.

  4. #4
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default

    Quote Originally Posted by Slartibartfast View Post
    Sound like you were lucky to only damage the blade and not yourself.

    Were you hand holding the blade and using the dremel?
    Yep.

    The worst thing is, I have a proper vice too.
    I bought the vice specifically because I know that holding stuff in one hand and power-tooling with the other is a recipie for disaster.

    I thought, I'd give the blade a quick once over with some polishing compound, so I neglected the vice since it'd only take a minute or two.

    You know how it is though. A couple of minutes in, and you're seeing good results, so you think you'll carry on. You ignore the obvious heat being generated by the polishing and then, *tink*, you remember that blades are notoriously brittle, even more so when hot.



    We live and learn I guess.

  5. #5
    Dapper Dandy Quick Orange's Avatar
    Join Date
    Mar 2007
    Location
    Centennial, CO
    Posts
    2,437
    Thanked: 146

    Default

    Ouch! I had a couple ideas you might consider. First, you could just round it out and have a notch. It would be kind of weird, so idea number 2: smooth it out and remove only as high as you have to, and all the way back to the heel. If there was a chance of a regrind, you'd still have all the material needed, yet you could still shave with it. It might be better used as a precision razor by then though

    That's just my armchair thoughts though. Someone with more creativity will probably drop in soon.

  6. #6
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default

    Hahaha!

    I'm glad I posted here. Yeah, it's a tragedy, but I got a laugh out of "precision razor". Thanks for that.

    I'm speaking to the guy I bought my honing stone from. I've seen some of his razors while I was researching to buy mine, and I was always impressed by the quality. of his work.

    I would have gotten one from him before, but, I took a real fancy to the one I have. (Don't we always hurt the one's we love the most )

    Taking it straight back to the heel would be the simplest I think, but yeah, it would look a bit funky. He's given me an idea that is a little more elegant, but, I don't want to post here without him having had a chance to look at the thread first.

    Again, thanks for the ideas/sympathy/laughs.
    Last edited by url; 08-05-2009 at 06:41 PM.

  7. #7
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,544
    Thanked: 3795
    Blog Entries
    1

    Default

    I know it's too late this time, but you should always specifically think about the direction of rotation before turning on your dremel and always have the disk rotating from spine to edge. Failing to do this leads to, well, your razor.
    Sorry for your loss. That's a really nice spine.
    Since I don't have a Bader, I fix blades like that on a 90 rpm wet grinder. Problem is that when you grind up so far into the blade you've essentially converted it into a narrow wedge and they can be hard to get honed up properly.
    It's worth a shot though!

  8. #8
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default

    Yep, that's pretty much what happend, I was polishing the sides, slipped and the buffer thing caught the edge. But yeah, it was the fancy spine I liked.

    Hindsight is always 20:20.

    I don't have a proper grinding stone. I "could" take it to my father in laws, he has one. But, I think I'd be better off passing the torch to someone more experienced in this case.

  9. #9
    url
    url is offline
    Junior Member
    Join Date
    Jul 2009
    Posts
    11
    Thanked: 0

    Default

    Yep. Once I was over the initial shock, I was aware that I had both eyes and kinda relieved. I still haven't found where the chip landed.

    I was just reading the rest of this sub forum and I'm seeing a lot of people wanting to dremel polish/buff etc.

    My experience now tells me:

    Vice
    Ice

    To be honest, I don't think I'd use a Dremel again. At the lowest RPM I've just trashed a perfectly good blade. The polishing tip (compressed felt type) caught the sharp edge and it was all over - no blinking time or anything.

    Maybe a sewn cloth type might have fared better, but, I'm thinking that a thread or group of threads could just as easily catch and deliver the same result.

    For work away from the edge maybe it's okay.

  10. #10
    Senior Member blabbermouth hi_bud_gl's Avatar
    Join Date
    Nov 2005
    Posts
    4,521
    Thanked: 1636

    Default

    I should say what you see is visual damage. The real damage is invisible. It happen when you start to put hallow blade under the DREMEL WHICH WAS rotated in high speed.
    At least this is not end of the world and we all learn and you did learn hard way.Please next time DON'T TOUCH HALLOW BLADE WITH DREMEL.
    hope this helps.(you can use very slow speed ones)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •