Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Member
    Join Date
    Oct 2008
    Location
    Munford TN
    Posts
    436
    Thanked: 46

    Default building a production work shop

    well all some of you all know that i am in the air force. well i am coming up on 14 years of service. so this leads me to start thinking about what im going to do when i get out. so i have really been considering doing restores for a living as i will have a retirement already coming in. so this leads to my question. what equipment would one need to make a production work shop. please considering i would be doing this for 9 hours a day for 5 days a week. now here is the thing i have 6 years to get the equipent so price is not a big issue. im looking at top of the line stuff. so any ideas would be great thanks guys. hopefully this post will good for some time to come.

  2. #2
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1
    Stefan

  3. #3
    Senior Member
    Join Date
    Oct 2008
    Location
    Munford TN
    Posts
    436
    Thanked: 46

    Default

    i have looked at that, the only thing with that is there is alot of extra stuff in those garages. im looking more towards a very specialized work place.

  4. #4
    Senior Member
    Join Date
    Mar 2007
    Posts
    608
    Thanked: 124

    Default

    I can't give an exhaustive list since I don't do restores, but I can say a few things you'll need if you're planning on doing alot- a good buffer, greaseless and polishing compounds, a good foredom type rotary tool, some good shapton or naninwa hones (plus prolly a few others), a band saw for scale making, a sanding rig for the scales, drill press, and a lot of other little tools the pros use to make their job easier.

    Looking through the thread that was linked, there really isnt a great deal in Lynns and Undreams shops that wouldn't be used in restoration or scale making. There are a few miscellaneous tools, but their shops look pretty specialized to me.

  5. #5
    Senior Member blabbermouth Joed's Avatar
    Join Date
    Jun 2008
    Location
    Upstate NY
    Posts
    5,003
    Thanked: 1827

    Default

    Since you have six years to acquire your production equipment I would suggest starting your restores now to become acquainted with the process. Expensive equipment is not needed to get started. You can even do most of the work by hand, which would enlighten you to the nuances of the work. With that knowledge you will be better educated to in how you would want your equipment to perform. Start cheap, learn as you go and you will be able to build a great shop. When looking for equipment research beyond razor restores for quality equipment.

    Good luck!
    “If you always do what you always did, you will always get what you always got.” (A. Einstein)

  6. #6
    Straight Shaver Apprentice DPflaumer's Avatar
    Join Date
    Sep 2009
    Location
    Boone, NC
    Posts
    1,093
    Thanked: 168

    Default

    I know a lot of the guys use the tumblers people who reuse bullet casings use. Walnut material to get the majority of the blade cleaned, then corncob with and without polish in it to shine everything up. I have to say that a drill press is a must because I have been drilling hones by hand and it is a huge pain to try and make sure they are straight. The sanding rig, probably necessary if you want to do a full scale operation. The bandsaw is a must, cutting scales by hand sucks, thats all there is to it.

    You will also want a small anvil, one of those made for making domed pins and such, I can't recall what they are called right now. You will need one or more small ball peen hammers, 4oz. and 8oz. are the best for this work in my opinion. A few files would be good to have probably, and a router if you want to try anything crazy. Dremel tools are great, and relatively inexpensive which is nice.

    If you plan on making scales, you will need a lot of clamps and such, particularly if you want to make your own micarta (I'm trying it next week). A nice vise would be a great help to you as well, the good kind that you bolt down rather than the clamp on variety.

    And of course scale materials, brass and nickel rod, brass and nickel washers, all that good stuff.

    That is all that comes to mind right now, but I'm sure Glen and/or Max will pitch in later.

  7. #7
    I used Nakayamas for my house mainaman's Avatar
    Join Date
    Aug 2009
    Location
    Des Moines
    Posts
    8,664
    Thanked: 2591
    Blog Entries
    1

    Default

    Quote Originally Posted by DPflaumer View Post
    I know a lot of the guys use the tumblers people who reuse bullet casings use. Walnut material to get the majority of the blade cleaned, then corncob with and without polish in it to shine everything up. I have to say that a drill press is a must because I have been drilling hones by hand and it is a huge pain to try and make sure they are straight. The sanding rig, probably necessary if you want to do a full scale operation. The bandsaw is a must, cutting scales by hand sucks, thats all there is to it.

    You will also want a small anvil, one of those made for making domed pins and such, I can't recall what they are called right now. You will need one or more small ball peen hammers, 4oz. and 8oz. are the best for this work in my opinion. A few files would be good to have probably, and a router if you want to try anything crazy. Dremel tools are great, and relatively inexpensive which is nice.

    If you plan on making scales, you will need a lot of clamps and such, particularly if you want to make your own micarta (I'm trying it next week). A nice vise would be a great help to you as well, the good kind that you bolt down rather than the clamp on variety.

    And of course scale materials, brass and nickel rod, brass and nickel washers, all that good stuff.

    That is all that comes to mind right now, but I'm sure Glen and/or Max will pitch in later.
    I picked up a wood cutting set of serrated wheels that I'll try with my Dremel to cut wood scales. I would imagine that working with acrylic and such will not be such a pain to deal with with a coping saw, but I have not tried it yet.
    Stefan

  8. #8
    Straight Shaver Apprentice DPflaumer's Avatar
    Join Date
    Sep 2009
    Location
    Boone, NC
    Posts
    1,093
    Thanked: 168

    Default

    Quote Originally Posted by mainaman View Post
    I picked up a wood cutting set of serrated wheels that I'll try with my Dremel to cut wood scales. I would imagine that working with acrylic and such will not be such a pain to deal with with a coping saw, but I have not tried it yet.
    I'm thinking a dremel with wood cutting bits will be in my future too. The problem with power tools and acrylic is that it tends to melt. There was actually a post on here a week or so ago about that issue. I actually think a hand saw would fix that issue, but I haven't tried it yet.

  9. #9
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    There were a few threads on the forum basicaly asking the same question so I started this thread

    What are the most used tools for restoration.... - Straight Razor Place Forums

  10. #10
    Senior Member floppyshoes's Avatar
    Join Date
    Mar 2007
    Location
    Montreal, Quebec
    Posts
    610
    Thanked: 147

    Default

    Unless you are a specialist, there is no way to tell what specialized tools you'll need. If you ask any two people you'd like to model, they will tell you different things. A craftsman's tools are a very personal thing, and selection comes down to style, ergonomics, habit and brand loyalty.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •