Results 1 to 10 of 16
Thread: flexible frameback
Hybrid View
-
03-15-2010, 02:47 PM #1
- Join Date
- Apr 2007
- Location
- Almost but not quite round the bend
- Posts
- 203
Thanked: 16Pictures are needed
Most FrameBacks were made during a time when steel was very expensive so the blade was made from a much thinner separate peace of steel so the cost could be kept down; some FrameBacks came with removable blades so that you could still have a seven day set so you had seven blades and Frame to hold them in
But we need pictures to see if it is designed to have the blade removed or not have a look at the pictures in the FrameBack Fanciers club see if yours looks like any of them
-
03-15-2010, 03:16 PM #2
- Join Date
- Feb 2009
- Location
- Asheville, NC
- Posts
- 71
Thanked: 10The multi-blade frame backs I've seen have some type of screw at the end of the spine to lock the replacement blade in place.
Is there indication of a threads or anyway of locking the blade in?
-
03-15-2010, 11:24 PM #3
- Join Date
- Oct 2009
- Location
- eastern panhandle west virginia
- Posts
- 1,521
Thanked: 198for starts, 6myles, its not multiblade frame back. i didnt see any pics of it in the frameback fanciers, so i will be uploading one within the next 90 min or so
always be yourself...unless you suck. Joss Whedon
-
03-16-2010, 12:17 AM #4
- Join Date
- Oct 2009
- Location
- eastern panhandle west virginia
- Posts
- 1,521
Thanked: 198here are the pics i promised. the name on the tang is very hard to read, but as best as we can come up with, it says william harmaragan cast steel razor sheffield
always be yourself...unless you suck. Joss Whedon
-
03-16-2010, 01:00 AM #5
- Join Date
- Feb 2009
- Location
- Asheville, NC
- Posts
- 71
Thanked: 10Wow, that thing is WILD! I can say I've never seen one like that before, so I will default to other more experienced persons than myself.
-
03-16-2010, 01:03 AM #6
- Join Date
- Oct 2009
- Location
- eastern panhandle west virginia
- Posts
- 1,521
Thanked: 198i plan on putting some new scales on it, just have to figure out what to uses. kinda in the dark on that one.
always be yourself...unless you suck. Joss Whedon
-
03-16-2010, 02:58 AM #7
- Join Date
- Aug 2009
- Location
- MD
- Posts
- 57
Thanked: 6I get what were talking about now, do have any pics with it slid off? Do you see any marks on blade that might have held the blade in place? Ie grooves, holes, dents? If there aren't any then some epoxy might be the fix. I'm guessing that it was probably hammered in place and was held by friction. If it's worked loose I wouldn't try hammering or pressing back in place.