Thread: First Restoration, Family Heirloom - need lots of advice!

For restoration Tips this is where you want to start

http://straightrazorpalace.com/works...wers-here.html

I also host a dedicated live chat every Tuesday in the Chat room (link is above) at 8:00pm Eastern time where we sit around and BS about Restoring razors...
Consider this an invite

Now my best tip for you is DO NOT start restoration with an Heirloom razor, they can never be replaced..
Get a junker of the same "type" as your ERN to learn on

Thanks a lot for the redirect, I had read most of the sticky but I found the wiki today and that's answered all my questions.

Originally Posted by gssixgun

Now my best tip for you is DO NOT start restoration with an Heirloom razor, they can never be replaced..
Get a junker of the same "type" as your ERN to learn on

That's the best advice you could get here.

Not only is it a bad idea in general to learn restoration with an irreplaceable heirloom, but that razor needs a practiced hand. The edge has a significant frown. That can certainly be corrected, and if I had bought a razor like that on ebay or at the antique shop I'd dive right in. But, even with several dozen restos under my belt, I wouldn't dream of working on an heirloom with a frown like that, and I'd seriously hesitate with anything that could be considered a family heirloom.

All that being said, I suspect that razor could be restored into something beautiful and functional.

Gotta agree on leaving that one to a more practised hand. Polishing the blade is not a huge challenge but that edge will be.

As far as info goes there were a number of Ern's making razors in Solingen. Although I don't see yours listed I'm guessing it was by C.F. Ern

August Ern, Solingen in 1922. Brand name: 'AE'. Open-blade razor maker.

C. Friedrich Ern, Solingen-Wald in 1922, Kanalstrasse 43 in 1939. Brand names:
'America Del Sud', 'Army and Navy', 'Ator', 'A.V. Humboldt', 'Balance', 'Bank', 'Bar',
'Barbersone', 'Barbers Pet', 'Barden', 'Bessimar', 'Bur', 'Cuba', 'Electro Taban', 'Ern',
'Ern 1166', 'Ern A-Z', 'Ern-Blaauwappen', 'Ernette', 'Ern-Goldwappen', 'Ern-
Grünwappen', 'Ern Junior', 'Ernovo', 'Ern-Silberwappen', 'Es-Ex', 'Farwood', 'Flaggen',
'Generale Ameglio,' 'Gong Razor', 'Gorki', 'Janissaire', 'Junk', 'Justrite', 'Ka Ci Be',
'King George', 'Knight Commander of the Bath', 'Kuroki', 'Laborista', 'Le Mondain',
'Lerne', 'Leiste', 'Liliput', 'Little Dorrit', 'Magnetic', 'Master', 'Master of Arts', 'Master
of Science', 'Mickiewicz', 'Moustafa Kemal Pascha', 'Niazi', 'Nodzu', 'Oxama',
'Palmerston', 'Peer', 'Perfecto', 'Persian', 'Platypus', 'Primus', 'Protector', 'Püt',
'Raccoon', 'Roosevelt Razor', 'Schwert', 'S Essex', 'Sim Mart', 'Ski', 'Strandbad',
'Suneo', 'The Boss', 'The Crown And Sword Razor', 'The Kid', 'The Michaelin', 'The
Mussel Razor', 'Turban', 'Waldern', 'Waldoo', 'Wee Macgreggor', 'Zeibek', 'Zepp.'
Open-blade razor maker.


C.R. Ern Sohn Nachf., Solingen-Weyer in 1925. Open-blade razor maker.

Friedrich Ern & Co., Solingen-Weyer in 1925 and 1928, Weyerstrasse 196 in
1939. Brand names: 'Commodus', 'Damokles', 'Doppeladler', 'Ern & Cie', 'Ern & Co.',
F. Ern & Co. Weyer-Solingen', 'Kobold', 'Newton' 'Ost', 'Sprock', 'The Sir Isaac
Newton', 'Vim', 'Weltbrand'. Open-blade razor maker.

W.C. Ern & Co., Solingen, Schlagbaumer Strasse 75. Brand name: 'Hatuey'. Razor-
blade maker.
Ern & Wills, Solingen-Wald, Wittkuller Strasse 154 in 1939. Brand names: 'Ascota',
'Erwil-Gold', 'Erwil-Luxus', 'Gold-Stern', 'Gold-Strom', 'Rheinkrone', 'Ruhr-Gold',
'Sensit', 'Vivat'. Razor-blade maker.
Ern & Ern 'Darsi' Gesellschaft, Solingen-Aufderhöhe, Löhdorferstrasse 133 in 1939.
Safety-razor maker.

That has a very nice etched blade. Should clean up fine.

Just my humble opinion, but if it isn't intended for shaving use, I'd keep it the way that it is. It looks great with its age and quirks. As a family piece, "This is the razor Great Grandpa used." to be enjoyed at family reunions, get togethers, etc., or placed in a case, I think it looks great with the patina.

IF there's someone in the family who wants to use it, or it's being given to you; then I'd opt for the restore, with the advice previously given.

I would like to restore it so it's shave-ready, but I'm going to wait until I have more experience, as per all the great advice in this thread. I agree it looks great aged like that, but I think it would mean more if it was being used as it was intended to.

Originally Posted by MattCastle

I agree it looks great aged like that, but I think it would mean more if it was being used as it was intended to.

The two are not mutually exclusive. One of my favorite razors is a Ross W. Black with a great deal of patina on the face of the blade. It is entirely possible to put a good edge on a razor like that without touching the rest of the patina. I'm not saying you should go one way or the other, but you certainly can.