Results 1 to 2 of 2
  1. #1
    OLD BASTARD bg42's Avatar
    Join Date
    Apr 2006
    Location
    Maleny Australia
    Posts
    708
    Thanked: 6

    Default this is another w&b

    this is another w&b from around the same date as the last the blade,it is the same shape however its a tad shorter and has a notch, also the tail is slightly longer and comes away from the shank at a more pronounced angle
    the condition was pretty much the same as the last ,deep pitting and lots of staining,therefore this one has been re-ground as well also I had to take a about 1/16' of the cutting edge due to a large nick,however I was able to retain the slight smile profile. As with the last I have left some fine pin heads where the pitting was at its deepest as I didn`t wish to remove any more metal. I have used a 3/32" brass tube inside a 1/8" brass tube at the pivot point
    I`ll get into the scales tomorrow I have some orange osage which could come up a treat
    Kind regards Peter
    Attached Images Attached Images   

  2. #2
    Loudmouth FiReSTaRT's Avatar
    Join Date
    Jun 2005
    Location
    Etobicoke, ON
    Posts
    7,171
    Thanked: 64

    Default

    Peter you are achieving 2 results:
    1) Pumping out some great stuff
    2) Making me even more impatient for my restoration stuff to arrive

    WTG!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •