Results 1 to 10 of 12
Hybrid View
-
09-30-2011, 03:34 PM #1
Thanks for the reply
got some pictures here.
http://img.auctiva.com/imgdata/9/7/8...08320685_o.jpg
http://img.auctiva.com/imgdata/9/7/8...08320699_o.jpg
I personnaly think I could get them clear again.
Just don't know how...
-
09-30-2011, 04:19 PM #2
There are several mild abrasives you could use like Cap Cod Polishing Cloths. They sell a preparation call Polywatch which is specifically designed for acrylic watch crystals. It will remove minor scratches and polish up the surface and remove yellowing due to aging and minor stains.
No matter how many men you kill you can't kill your successor-Emperor Nero
-
09-30-2011, 04:30 PM #3
- Join Date
- Sep 2011
- Location
- Stockton, CA
- Posts
- 58
Thanked: 10Personally I would be tempted to try one of the automotive headlight restoring kits. I don't know if they are available in your area or not, but they are pretty common here and inexpensive.
-Xander
-
09-30-2011, 05:00 PM #4
I've seen plenty of those. Dismantled the scales. wet sandpaper inside and outside of scales, 220 to 2500 and final polish on the buffer. They won't turn completely white again but they can turn our pretty close.
-
09-30-2011, 05:20 PM #5
Looking at the pictures I am concerned that the scales are
decomposing based on the corrosion pattern. A light
wax or even mineral oil is in order -- ASAP.
Light oil or wax will fill in surface cracks and
give you some indication if surface polishing
will get you an improvement. In this case
I believe that the scales are decomposing and
can have rather deep issues. If the internal
volume of the scales is not clear then a polish
will not help. Research Renaissance Wax.
Someone mentioned headlight polish. I would add
kitchen glass top stove polish and a good toothpaste.
If you have headlights with the newer plastic cover that are
anything but clear go for the headlight cleaner. Days are
getting short and hazy headlights will blind oncoming traffic!
For us in north of the equator this is timely.
Sneak up on any polishing process and no power tools.
EDIT:
Compare and contrast Acrylic and Celluloid.
-
09-30-2011, 06:19 PM #6
I would seriously consider not doing anything with them immediately. I may be wrong, but it looks like they are the victims of cel rot. Judging from the tarnish pattern on that blade and having had the same exact situation with a Dubl Duck Satinedge in the past, I would have second thoughts about ever using those scales again. I hope I'm wrong and just erring on the side of caution . . . . but . . . .
Regards - Walt
-
The Following User Says Thank You to Walt For This Useful Post:
niftyshaving (09-30-2011)
-
10-01-2011, 06:55 AM #7
- Join Date
- Jul 2011
- Location
- Jacksonville, FL
- Posts
- 142
Thanked: 20I use plastix headlight lens polish on acrylics and it helps clean them up but you won't ever really get them crystal clear again.
-
10-01-2011, 07:00 AM #8
-
12-06-2011, 09:47 PM #9
i have to agree with Walt on this one, i have seen a few sets of dublduck satinedge razors on here and ebay that have what your looking at here, its not plastic scales but celuloid, and by the looks of that blade the scales are decomposing quite badly, i would look at de-pinning that blade and seeing if its savable, if so restore the blade and look to re scale it with a different material altogether.
there maybe someone on here who can help you recover and re-use the inlays from the old scales, but i would really suggest getting that blade away from those scales as soon as you can.
-
12-06-2011, 10:09 PM #10
From the pics I'd guess they ain't acrylic but decomposing celluloid. I would bet a damp litmus paper would show acidic gas off from the scales. Good luck with the blade. It looks bad.
“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”