New to restoration, before I get in over my head

[MikeTheRipper12]

I figured before I dive in head first and realize I left my scuba tank back on the boat I would shoot you masters of metal a message. I have a few blades that need light restoration. Mostly some light rust removal, some darker black rust, mostly dried oil in between the scales turned to black goop. I wanted to know what were the usual supplies that are the basics to have on hand while doing something like this. So far I've just been lightly using alcohol pads, a microfiber cleaning cloth (that is now very very dirty, so I'll have to get another one), and some light non-aggressive jewelry cleaner ment for all metals. What should I use to remove black rust? Oh and how does one go about removing the pins in the scales so I can clean in between them better. ANY help would be greatly appreciated. Help me save these blades!
Thank you ahead of time
-Mike

[karlej]

Check out the "Welcome to the Workshop" stickys. Lots of good how to and supplies info. there.
Good Luck

[baldy]

Yep, as karlej said, try the workshop sticky http://straightrazorpalace.com/works...wers-here.html there is a good thread on un-pinning razors and some on hand sanding that you will want to have a look at. If you really want to get it cleaned up unpinning and hand sanding would probably be the way to go, but you could do a light sanding and/or polish without unpinning if you prefer.
Grant