Page 1 of 3 123 LastLast
Results 1 to 10 of 23
Like Tree7Likes

Thread: Restoring a blade while preserving etching

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Posts
    16
    Thanked: 0

    Default Restoring a blade while preserving etching

    Hey all,
    Just received my first razor to restore, its an "Original Dagger" from Joseph Allen & Sons. The blade has an etching that currently is in great shape and it will add a lot of character once the blade is restored. That being said, I am afraid sandpaper will significantly damage the etching. I have seen another razor, with the same etchings that was restored, and it was significantly damaged by some abrasive cleaning- I assume sandpaper.

    My question is if there is a way to clean the blade of rust and patina with out sand paper. Perhaps a chemical of some sort? I have heard WD-40 might help? Does anyone have any suggestions? Or should I wetsand with very high grit and accept that it will take longer?

    Any tips would be greatly appreciated!

    Take Care,
    John

  2. #2
    Senior Member JimBC's Avatar
    Join Date
    Aug 2010
    Location
    Between Owensboro and Bowling Green KY
    Posts
    236
    Thanked: 31

    Default

    I have sanded down one too many etchings. Post up some pics for reference. I believe some have had luck with a vibratory tumbler..just got one,but have yet to try it.
    "The needs of the many out way the needs of the few or the one." Only if the 'few' or the 'one' are/is offering themselves (thru freewill) for the sacrifice. And not thru force from the 'many'.

  3. #3
    Senior Member blabbermouth Theseus's Avatar
    Join Date
    Mar 2011
    Location
    Ohio
    Posts
    2,786
    Thanked: 421

    Default

    As long as it isn't gold wash or a frosted etching, metal polish and #0000 steel wool should be just fine.
    ScottGoodman likes this.

  4. #4
    Senior Member Str8Shooter's Avatar
    Join Date
    May 2011
    Location
    The Woodlands, Tx
    Posts
    1,912
    Thanked: 214

    Default

    every etching I have ever done was not liking even MAAS. pics would help give us an idea but right now it's all guess work.
    "We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm."

  5. #5
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    What theseus said or send it to someone who has a tumbler...that's about all you can do & keep the etchings.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  6. #6
    Junior Member
    Join Date
    Jan 2012
    Posts
    16
    Thanked: 0

    Default

    Thanks for the advice. I'll post some pics when I get home from school. Maybe I'll pick up some metal polish on the way home to.

  7. #7
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    Maas & Flitz are what I prefer to work with, but most any metal or chrome polish will work fine. I like to use thick paper towels like the blue "shop towel" available at the auto part stores. Just watch that edge...
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  8. #8
    Junior Member
    Join Date
    Jan 2012
    Posts
    16
    Thanked: 0

    Default

    Thanks shooter- and that's enough to eat through some rust and darkening of the blade?

  9. #9
    aka shooter74743 ScottGoodman's Avatar
    Join Date
    Sep 2009
    Location
    SE Oklahoma/NE Texas
    Posts
    7,285
    Thanked: 1936
    Blog Entries
    4

    Default

    You should know that to give you a good hypothesis we need pictures. Your & my idea of a little rust, tarnish, darkening may vary a bit.

    Rust is always questionable, you never know how deep it is. You simply can't hurt the razor by polishing it by hand with a known quality metal polish. This is the least aggressive approach. Then, if you don't get all the rust & darkening off the blade, you can take steel wool to it with either wd-40 or metal polish, then metal polish by hand, and see how it goes. Toothpicks, dental floss, and cotton swabs are great around the pivot point. Sometimes we simply have to admit we have an old razor that may never look new & shiny, the most important thing is how it shaves. I personally like the nostalgia of shaving with an old and imperfect razor, reminds me of...me.
    WhiteLion likes this.
    Southeastern Oklahoma/Northeastern Texas helper. Please don't hesitate to contact me.
    Thank you and God Bless, Scott

  10. #10
    Junior Member
    Join Date
    Jan 2012
    Posts
    16
    Thanked: 0

    Default

    Your right, I should have known better. Here are some pics. Name:  IMG_8130.jpg
Views: 3024
Size:  18.8 KBName:  IMG_8132.jpg
Views: 2982
Size:  16.8 KBName:  IMG_8137.jpg
Views: 3109
Size:  19.7 KB

Page 1 of 3 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •