Thread: Recommend a Bench Grinder / Polishing Set...

Hi Folks,

After hand sanding my first razor to a near mirror finish, I've decided I need my fingers and hands for my day job and am going to pick up a bench grinder/polisher. I'm not bothered about make, brand etc. and for my first lot of kit I'll be happy buying cheap and replacing with better kit later.

I've seen this bundle on eBay that seems to do what I'm looking for. Can anyone give comments on if I'll need to buy more gear, or if this lot should help me go from a rusty blade to an as-new one

Thank you!

That seems like a good deal.
However, make no mistake: if you think your fingers are any safer, think again.
If anything, your fingers will be a a lot more danger.
That's no reason not to do this of course. I just thought I'd mention it.

What is the RPM? If at all possible, you want 1750 RPM. Most of these are 3500, and too fast for what we do. Specific numbers may be different on your side of the pond. You can compensate for higher speeds by going to smaller diameter wheels.

Originally Posted by skipnord

What is the RPM? If at all possible, you want 1750 RPM. Most of these are 3500, and too fast for what we do. Specific numbers may be different on your side of the pond. You can compensate for higher speeds by going to smaller diameter wheels.

It looks like that model goes at 3000 RPM :-/

The difference in a Grinder -vs- Buffer is in the clearance ie: the length of the arbors

To work on a razor all those shrouds have to come off then you still might not be able to get your hands and the razor in there near the wheel safely.

If you have to start doing buffing gymnastics, two very bad things tend to happen
1. You launch a razor
2. You lose blood

The arbors seem to be included in the package, so that should be allright.

Originally Posted by gssixgun

If you have to start doing buffing gymnastics, two very bad things tend to happen
1. You launch a razor
2. You lose blood

And Fingers, dont forget Fingers!

I use a large heavy duty set of welding gloves when handling blades on my polishers. While I do lose some dexterity, I'd rather keep my fingers. Another tool I've found useful is a pair of locking pliers and a rag. You have to be careful about placement, and make sure it grips solidly. Shooting a razor off a buffer is hazardous to your health, and a death sentence to your blade.

Originally Posted by KillerDr3w

Hi Folks,

After hand sanding my first razor to a near mirror finish, I've decided I need my fingers and hands for my day job and am going to pick up a bench grinder/polisher. I'm not bothered about make, brand etc. and for my first lot of kit I'll be happy buying cheap and replacing with better kit later.

I've seen this bundle on eBay that seems to do what I'm looking for. Can anyone give comments on if I'll need to buy more gear, or if this lot should help me go from a rusty blade to an as-new one

Thank you!

I would get one like this one..........Buy.com - New Bench Buffer Polisher Grinder Buffing Polishing Machine or something with the tapered
spindle that you can quick change the buffs. The buffs are cheap and have leather centers. You will be able to switch buffs in seconds. Each compound requires its own buff. You can also purchase grinding wheels for this type of jewelers polisher.

You tube video might help........How to Repair and Re-size Jewelry : The Buffing Machine for Jewelry Resizing & Repair - YouTube