Quote Originally Posted by Wintchase View Post
Every time I pin I go through 15 washers... While tapping the washer pops off and goes to that place socks in the dryer go.
Grab yourself a steel block and drill some 1/16 holes and other sizes if you pin with thicker pins some times. I drill 2 of each size I use, one about 9mm and one about 13mm. That way once your pins are cut to length you can drop it down the hole and start to peen one end. I do it just enough so that when I drop the washer on it wont fall off. That should solve 50% of the pop offs.