Results 1 to 10 of 21
Thread: Cold Bluing
Hybrid View
-
09-13-2012, 10:26 PM #1
I put a blade in vinegar to experiment. Forgot it for 2 days!
Not exactly blue, but it is hard coated! And as to BobH, I have had the experience of doing a nice blue job and cannot get a good picture to save my life! It never seems to photograph well?
Last edited by sharptonn; 09-13-2012 at 10:30 PM.
-
09-13-2012, 10:34 PM #2
- Join Date
- Aug 2006
- Location
- Maleny, Australia
- Posts
- 7,977
- Blog Entries
- 3
Thanked: 1587I've had some success with the bluing cream rather than liquid. It was, for me at least, a lot easier to apply evenly than the liquid stuff. The other thing I found was that a "matte" finish looks better when blued (I sanded the blade to around 600 grit before bluing). I did the whole blade on one razor, and the nice shiny bevel looks quite good against the blue (must tape the spine though - shiny spine on a blue blade looks a bit crap IMO).
James.<This signature intentionally left blank>
-
09-14-2012, 04:32 AM #3
I've used oxalic acid in the past. It's more black than blue but quite a durable coating.
http://straightrazorpalace.com/custo...mel-6-8-a.html“The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”
-
The Following User Says Thank You to onimaru55 For This Useful Post:
BobH (09-14-2012)