Results 1 to 3 of 3
Thread: fljestrand
-
12-21-2006, 10:19 AM #1
fljestrand
I picked this up not long ago ,good price but someone had already had a go at it
http://cgi.ebay.com.au/ws/eBayISAPI....1690&rd=1&rd=1
shocking plain wood scales and really butchered the shank. The blade was pitted which didn`t show up on the pics
Anyway ,re-grind new scales and a spit and polish and this is her . The scales are actually red deer antler with the outside ground off and then sanded ,then I let the polishing wax over heat so it would get into the surface ,hence the colour ,bit of an experiment but I kind of like it
Kind regards PeterLast edited by bg42; 12-21-2006 at 10:26 AM.
-
12-21-2006, 03:19 PM #2
Those scales look great!
You can tell there is quite a polish on it from the reflections.
What polish did you use, and what would the material have looked like if you did not allow it to soak/melt into the horn?
Looks great!!
C utz
-
12-21-2006, 08:44 PM #3
Plain white with a few imperfections ,the polish is green wax based polish used in conjunction with a buffing wheel,its very hard to keep the colour out so its better if you want a clean surface is to use a non wax base polish ,ofcourse it has to be hand sanded to a fine grit first
hope this helps
Kind regards peter