Thread: Maas Polish - First Time User Opinion

Originally Posted by jumbojohnny

My buffer is 3800 RPM - one speed. I use it on thicker blades and wedges. Any of the thinner style blades I do by hand. A buffer will make light work thin metal. I have seen the ends of the razors get very weak and deformed even.

Using 2"wheels is a workaround.

It will be fine with 4in wheels, I have two, both work just fine. Lot of guys here use them with 4in wheels.

Originally Posted by Euclid440

It will be fine with 4in wheels, I have two, both work just fine. Lot of guys here use them with 4in wheels.

Yes , below 6" or 8" is fine

So when using MAAS do you just need the metal polish or is it best to get the microfibre cloth? Will any cloth do?

Originally Posted by TrowelMan

So when using MAAS do you just need the metal polish or is it best to get the microfibre cloth? Will any cloth do?

I just got a 4oz tube of polish. I use an old tee-shirt to apply and wipe.

For polishing I use blue paper shop towles, the towles them selves are abrasive and last a long time. Micro Fiber is good for final buff to remove fingerprints.

I use a old clean cotton rag,dish towel with Maas.. Works great.. this was done with elbow grease and Maas and a rag.. U can get great results just take ur time I'm no expert still a noob but having good luck so far!!