Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree1Likes

Thread: Need Advice: First Restoration

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Posts
    11
    Thanked: 0

    Default Need Advice: First Restoration

    Hello all,

    I recently acquired two straight razors. Both needed to be restored since they were dull and rusted. This is my first restoration. I was able to remove the rust, but now I am wondering if I should proceed any farther because I do not know if the blades are any good. The razor without the handle has some slight pitting on the spine and the spine of the other razor is a bit flat on account of my poor sharpening skills (neither one is razor sharp). Also, the edges of both blades are slightly irregular. Should I proceed? If they are worth saving, can I rescale them and ship them out for professionally honing with both blades in their present shape? Any insight is greatly appreciated.

    Icarus


    Name:  IMG_3106.jpg
Views: 158
Size:  66.2 KBName:  IMG_3107.jpg
Views: 164
Size:  67.5 KBName:  IMG_3110.jpg
Views: 157
Size:  23.7 KB
    Name:  IMG_3105.jpg
Views: 161
Size:  43.2 KBName:  IMG_3103.jpg
Views: 165
Size:  49.6 KBName:  IMG_3102.jpg
Views: 157
Size:  70.4 KB

  2. #2
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    Hi Icarus, and welcome to SRP!

    The first one is a George Wolstenholme Pipe Razor and when fixed up, it should be a fine shaver. They aren't rare razors, but G.Wostenholme was a very well known Sheffield maker, and he made some fine, fine steel. Don't worry about the pitting on that one. It is far form the edge and so is really only a cosmetic flaw. It won't have an effect on the shaving edge.

    I'll be honest and say that I don't recognize the second one, but I'm having trouble making out the text on the tang. Could you upload a close-up or type what it says? That will help.

    EDIT: for the G.W. Pipe, I'd definitely say that it is worth making some scales and sending it for a pro honing.

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

  3. The Following User Says Thank You to Cangooner For This Useful Post:

    Icarus (02-12-2013)

  4. #3
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    Just re-read your post: when you say the edges are irregular, do you mean that the edges are serrated, or that the edges are warped or kind of wavy? If it's the former, that can be easily fixed, if it's the latter you may run into serious problems getting them fixed. Fingers crossed the edges are just a bit rough...

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

  5. The Following User Says Thank You to Cangooner For This Useful Post:

    Icarus (02-12-2013)

  6. #4
    Junior Member
    Join Date
    Dec 2012
    Posts
    11
    Thanked: 0

    Default

    The razor with the handle was manufactured by the Simon Pure Cutlery Company.

  7. #5
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    Quote Originally Posted by Icarus View Post
    The razor with the handle was manufactured by the Simon Pure Cutlery Company.
    Thanks - I'm none the wiser unfortunately but hopefully someone else will come by with some info on that one for you. I did a really quick google search and mostly found posts on various shaving sites asking whether anyone had any info on Simon Pure. But form what little I could find it looks like they were made in Solingen which is generally a good sign. From your pics it really looks in great shape so I'd say it's worth a shot to send it out for honing. You might have a real gem there. Cool scales, BTW.

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

  8. #6
    Junior Member
    Join Date
    Dec 2012
    Posts
    11
    Thanked: 0

    Default

    I would not say that they are warped; they are just not perfectly straight (when viewed from the side). In particular, the razor with the handle has a very slight angle that begins at about the last half inch of the blade. I had read that it is best to have a straight edge, but then again, maybe I took that info a little too literally when I wrote my description.

  9. #7
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    Ah, OK. When viewed from the side, the edge doesn't have to be straight - that's a matter of preference. My favourite shavers tend to have a little bit of a "smile" meaning the middle of the blade is wider than the toe and heel. Don't worry about that at all.

    If the blade has a "frown", meaning the middle of the blade is narrower than the toe and heel, then you have problems. That becomes very, very difficult both to hone and use. From your pics, it doesn't appear that this is an issue with yours.

    I'll dig up some pics to show this...

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

  10. The Following User Says Thank You to Cangooner For This Useful Post:

    Icarus (02-12-2013)

  11. #8
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    OK, This is a pre-restoration Wostenholme with a smiling edge:



    Note how it curves upwards. That's totally fine and it's far less pronounced in your blades.

    And here's my DublDuck with a straight edge:



    It has a totally straight edge. That, too, is totally fine.

    What you don't want is something like this:

    Name:  100_7110.jpg
Views: 145
Size:  77.6 KB

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

  12. The Following User Says Thank You to Cangooner For This Useful Post:

    Icarus (02-12-2013)

  13. #9
    Junior Member
    Join Date
    Dec 2012
    Posts
    11
    Thanked: 0

    Default

    Thanks so much for all of the advice. I will complete the restoration and post pictures when I am finished.
    Cangooner likes this.

  14. #10
    Incidere in dimidium Cangooner's Avatar
    Join Date
    Mar 2012
    Location
    Val des Monts, Quebec
    Posts
    4,065
    Thanked: 1439

    Default

    You're very welcome - glad to be of assistance.

    I'm looking forward to seeing the restoration! Good luck.

    It was in original condition, faded red, well-worn, but nice.
    This was and still is my favorite combination; beautiful, original, and worn.
    -Neil Young

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •