Results 1 to 10 of 49
Thread: Read this if you own a SHAPTON!
Hybrid View
-
09-23-2008, 06:48 PM #1
ChrisL,
I've heard good things about the 1k Bester in the knife sharpening world.
cass
-
09-23-2008, 06:51 PM #2
-
09-23-2008, 08:06 PM #3
- Join Date
- Oct 2007
- Posts
- 1,292
Thanked: 150I bet you could cut up a DMT easier than a shapton glass stone, a bandsaw would probably do it.
So-san has said good things about bester products and I'm inclined to take his word for it .
Though, I can't really say that I need a thinner 1k hone. Any particular reason you guys are searching for one?
-
09-23-2008, 08:19 PM #4
I prefer the feeling and even time on the stone that a narrow hone allows. I also prefer wider, thicker blades for the most part and set a lot of bevels. A narrow hone makes it much easier when you are talking lots of rolling X-patterns IMO. Also, if you use any sort of X pattern on a three inch hone and keep the blade flat, then the toe will always wear faster than the heel since it spends so much more time on the stone. I use some sort of X at least somewhere in honing most blades.
Those Bester's look like an option. They have a bunch of other stones that look good too. I'm going to do a lot of research here. Sorry this is getting a little
-
09-23-2008, 08:29 PM #5
What if you started with a naniwa chosera @30mm thick you could make 5 or 6 10mm hones and give one to me for the great idea and sell the rest.
-
09-23-2008, 08:35 PM #6
I have never been able to master the illusive rolling hone stroke and would really need to witness this first hand. I have had better results with narrow hones hitting the entire length of the blade. It just occurred to me that I'll probably see Randy Tuttle this weekend at a knife show! Maybe my rolling hone stroke is not that far off after all.
Chris L"Blues fallin' down like hail." Robert Johnson
"Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith