Page 1 of 7 12345 ... LastLast
Results 1 to 10 of 66
Like Tree19Likes

Thread: Some thoughts on how wedges were honed in the day...

  1. #1
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default Some thoughts on how wedges were honed in the day...

    First lets define a wedge, as any heavy bladed 1/4 hollow or less old razor....

    I have been doing my fair share of these as of late and have noticed some things, and wanted to see if anyone else has come to the same or other conclusions...

    Almost, every one has to have a huge re-bevel set to what we (SRP) consider shave ready... The original bevels are much much smaller and steeper... This has led me to some therories...
    I think when the original bevel were done, the cutler used a cheater strip of metal, something like a faux frameback to set the steep bevel and that the edges were then sharpened on a pasted loom style strop set slightly looser then what we consider optimal.... This would explain the small, steep, rounded, bevel that I am finding on these razors.... what do you guys think?????
    Last edited by gssixgun; 12-19-2008 at 07:09 PM.

  2. The Following User Says Thank You to gssixgun For This Useful Post:

    tinkersd (08-13-2012)

  3. #2
    Coticule researcher
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,872
    Thanked: 1212

    Default

    I saw this in the "New Threads" windows, just recently:

    Some thoughts on how wedges were honed in the day...
    gssixgun
    Today 09:01 PM
    by gssixgun
    0 1 ...and then my head exploded!
    JMS
    Today 08:58 PM
    by majurey
    8 102 The Conversation


    jdto likes this.

  4. The Following User Says Thank You to Bart For This Useful Post:

    RazorforLife (06-05-2013)

  5. #3
    Coticule researcher
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,872
    Thanked: 1212

    Default

    I have done a few. They always took a bit of extra bevel correction work.
    For what it's worth, I have seen the owner of a Belgian store, that sells traditional cutlery, straight, DE's and other shaving gear, hone up a razor on a couple of occasions. He hones a while on a big coticule, whithout much testing (he relies on how the water runs up the blade). After that he goes to a pasted paddle strop, with red Dovo paste. He tries to shave a hair, and if he's not pleased, he loosens the strop a bit...
    I can imagine that he needs to loosen the strop each time he hones a wedge, and more if he hones it again. But I don't think that faux frameback honing (I have thinking about this for honing my kitchen knives) was the standard way to hone a (near) wedge.

    Just some thoughts,

    Bart.

  6. #4
    Senior Member kevint's Avatar
    Join Date
    Mar 2008
    Posts
    1,875
    Thanked: 285

    Default

    or could it just be they were sharpened like a knife? Then continually touched up on a pasted strop.

    It is surprising how quickly information can be lost sometimes. It was not that long ago.

    Have you ever seen anything that looks like the spine cover?

  7. #5
    Never a dull moment hoglahoo's Avatar
    Join Date
    Feb 2008
    Location
    Tulsa, OK
    Posts
    8,922
    Thanked: 1501
    Blog Entries
    1

    Default

    I see a lot of spine wear on those old wedges. Maybe the bevels are just rounded through age and corrosion? Heavy pasted strop usage?

    I also remember having seen some old hones on ebay that were seriously dished out in the middle. maybe such a curved hone would explain a steeper bevel angle
    niftyshaving and Geezer like this.
    Find me on SRP's official chat in ##srp on Freenode. Link is at top of SRP's homepage

  8. #6
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    Hmmmm good point Lee I have seen those too

    I haven't ever seen one Kevin except for the detachable blade razors, that's what made me think of it..

  9. #7
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    I have no idea. All I know is that the ones I have honed have taken awhile. I always assumed that it was as Lee said, just age, corrosion and knocking around for 150 years.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  10. #8
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,972
    Thanked: 2202
    Blog Entries
    1

    Default

    I speculate that the hardness of the spine is less than the hardness of the edge. Therefore the wear on the spine from honing would be greater than the wear on the edge This would make the angle if the bevel shallower with each honing session and with each session the bevel would get wider.

    It is time to take some old razors to Mike Blues workshop for some HRC testing. I think there will be a substantial difference in HRC of the spine and edge.

    Just my two cents,
    Last edited by randydance062449; 12-20-2008 at 04:33 AM.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  11. The Following User Says Thank You to randydance062449 For This Useful Post:

    JimmyHAD (12-20-2008)

  12. #9
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,972
    Thanked: 2202
    Blog Entries
    1

    Default

    Oops! Got off track there.

    Ya, I think they used a slack strop or loom and probably a dished sharpening stone or they raised the spine off the hone. They did whatever was required to get an edge that they could shave wth. The few old timers that I have spoken with have razors with noticeable hone wear on the spine and most did not feel all that sharp.
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  13. #10
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    The biggest problem I have seen in the old wedges is the extreme wear on the spines. This flattening and many times uneven and different flattening (from either grinding or honing) on both sides is what I believe causes the larger bevels on these razors. When I hone one that is in really good shape (when/if you can find one in great condition), the honing doesn't cause any wear near as much bevel wear and the bevel remains relatively small.

    When honing these, unfortunately, there is the need to bring the steel down to a level where the entire bevel will hit the stone and this even causes more wear.

    Lynn

Page 1 of 7 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •